Advertisement
Disconnecting multiple Philips LivingColors (optional)
If you connect another remote control to the same luminaire, it will be automatically disconnected from the first remote control (unless
the two remotes were connected first - see further).
Alternatively, you can disconnect a remote control from a luminaire as follows: Hold the remote control against the Philips logo on
the lens of the product, then press and hold the "0"-button. The product will flash 3 times. Hold the "0"-button until the LivingColors is
switched off automatically. The LivingColors is now disconnected.
10sec
=
max 5cm
Connecting additional Remote Controls
You can control the same products with several remote controls. This is convenient if, for example, you want to leave one remote control
in the kitchen and another one in the living room.
Step 1:
Always reset the additional remote control first. Open its battery compartment and press the RESET button for a few seconds.
The LED indicator will blink once (hidden underneath the intensity up symbol). The remote control has now been reset.
Step 2:
Hold the additional remote control close to your current remote (the "I"-buttons pointing at each other). Press the "I" buttons
simultaneously on both remotes while the LED indicators on the remote controls blink intermittently. When they stop blinking, the two
remotes are connected to the same network.
10 sec.
=
Advertisement
