Advertisement
Since VAST rev. 1.13, the following keypad functions will be available as the defaults for the joystick.
1
Pan
9
2
Patrol
10
3
Stop
11
4
Home
12
5
Focus Near
13
6
Focus Far
14
7
Snapshot
15
8
Preset
16
If you prefer to assign different functions for the keypad, enter the LiveClient, and find the associated configuration in
Client Settings > Joystick Settings.
Note that the RS232/485 terminal connection is currently not supported.
NOTE:
1. Avoid spilling water onto the device. Avoid using this device in a high-moisture environment.
2. This device should be operated in the indoor environment.
3. When the temperature is lower than -10ºC, the LCD panel may not function normally.
4. If the included power adapter should be replaced, use a 9-15V/1000mA alternative.
5. Avoid impact to the device.
6. This product is manufactured to comply with the requirements of the following directives: 89/336/EEC, 92/31/EEC,
93/68/EEC.
All specifications are subject to change without noice.
Copyright © 2016 VIVOTEK INC. All rights reserved.
VIVOTEK INC.
6F, No.192, Lien-Cheng Rd., Chung-Ho, New Taipei City, 235, Taiwan, R.O.C.
|T: +886-2-82455282| F: +886-2-82455532| E: sales@vivotek.com
#1
17
#2
18
#3
19
#4
20
#5
21
#6
22
#7
23
#8
24
VIVOTEK USA, INC.
2050 Ringwood Avenue, San Jose, CA 95131
|T : 408-773-8686 | F : 408-773-8298 | E : salesusa@vivotek.com
#9
25
Cancel/Clear/Esc
26
#0
27
Enter
28
Full Screen
Manual recording
Change Layout
Rewind
Pause
Play
Speed Up
Speed Down
VIVOTEK Europe
Randstad 22-133, 1316BW Almere, The Netherlands
T: +31(0)36-5298-434 E: saleseurope@vivotek.com
Advertisement
