Inspect And Lubricate The Winch; Lubricate The T-Bolt - Genie RL4 Vertical Mast Service Manual

August 2015
B-5

Inspect and Lubricate the Winch

Terex specifications require that this procedure be
performed every 250 hours or quarterly, whichever
comes first.
Maintaining the winch is essential to good machine
performance and safe operation. An unsafe
working condition exists if the winch has excessive
wear and/or does not operate smoothly, free of
hesitation and binding.
Carefully lubricate the winch.
1
Part No. 1266665
Checklist B Procedures
B-6

Lubricate the T-bolt

Terex specifications require that this procedure be
performed every 250 hours or quarterly, whichever
comes first.
Maintaining the T-bolt is essential to good machine
performance and safe operation. An unsafe
working condition exists if the T-bolt has excessive
wear and/or does not operate smoothly, free of
hesitation and binding.
Using the illustration as a guide, locate the
1
T-bolt at the bottom of the mast assembly.
Remove the T-bolt from the mast.
2 Remove all dust, dirt and copper anti-seize
from the threaded surfaces of the T-bolt, and
apply a few drops of light oil or copper
anti-seize lubricant onto the threaded
surfaces.
3 Fully install the T-bolt into the mast.
a
a T-bolt
RL4 Vertical Mast
Service Manual
29