KingShield HDM2400 Instruction Manual

1. The appliance automatically turns on and delivers warm air when hands approach the underside of the
unit within 12cm. The power will be cut off within 2 seconds after the hands leave the air outlet.
2. The sensor operates with a 0.5 second delay to avoid the sensor starting up by mistake.
3. The appliance will cut power when continuously operated for over 1 minute to avoid overheating and
activation by mistake.
CLEANING & MAINTENANCE
Always switch off at the mains before any cleaning or maintenance. If repairs or other works are to be
carried out these should be carried out by a fully qualified electrician.
1.
The housing can be wiped with a soft and lightly moist cloth or sponge and if necessary, with some
mild cleaning solution.
2. Clean the two lenses of the proximity sensor at regular intervals, for this purpose use a clean soft dry
cloth.
3. The hand dryer must undergo a thorough cleaning every 3 months or more frequent as usage dictates.
Should the power lead become damaged, it must only be replaced by the manufacturer, the manufacturer's
customer service unit, or a similarly qualified specialist to avoid risk of injury.
TECHNICAL INFORMATION
Rated voltage:
Wattage
IP Rating:
Earthing Safety Class:
Operation:
Max. uninterrupted
operation:
'Stand by' consumption: < 1W
Dimensions:
Your KingShield 2400W Hand Dryer is guaranteed
for 12 months from the date of purchase.
This is in addition to your statutory rights.
PLEASE KEEP THESE INSTRUCTIONS
SAFE FOR FUTURE REFERENCE
WEST ROAD . HARLOW
ESSEX . CM20 2BG . UK
s a l e s @ g r e e n b r o o k . c o . u k
w w w. g r e e n b r o o k . c o . u k
OPERATION
230V AC - 50Hz
2400W
IP21
I
Automatic operation (on/off) controlled
by electronic proximity sensor
1 min
240W x 240H x 190D (mm)
GUARANTEE
2400W Automatic Hand Dryer
• Thank you for purchasing our HDM2400 Automatic Hand Dryer
• Please read this instruction manual carefully and keep for future
reference.
IMPORTANT INFORMATION
Please read the information contained in these instructions carefully. It provides important advice regarding
the safe installation, use and maintenance of the unit. These instructions should be kept in a safe place and
passed on to the new owner should the unit be resold.
The manufacturer will accept no liability or damage resulting from failure to observe the
following:
• Ensure packing materials are disposed of properly.
• Any damage to the hand dryer on delivery should be reported to the supplier before the unit is
connected.
• This product should be installed by a competent person and in accordance with the current IET Wiring
Regulations. If in doubt consult a qualified electrician.
• The hand dryer should only be used for the purpose for which it is intended.
• Repairs to the hand dryer should only be carried out by a trained specialist.
Instruction Manual
Model: HDM2400