Summary of Contents for Markant MAX display
- Page 1 U s e r m a n u a l f o r M A X s i t / s t a n d d e s k s 6 5 - 1 2 8 c m Before using the system carefully read this manual and store the manual for reference › MAX display manual...
- Page 2 MAX display manual Contents Handset Drive up/down Saving preferred height Moving to a saved preferred position Setting of indicated height Reset procedures › MAX display manual...
- Page 3 The keys have to be pressed until the desired height of the desk has been reached. The display always shows the actual height. For example: The desk moves as long as the keys are pressed or until the end position is reached. › MAX display manual...
- Page 4 The desk moves towards the position as long as the key is pressed. After reaching the saved height or if the key is not pressed anymore the desk stops. If any other key is pressed while the desk is moving towards the saved position the desk stops. = Attention › MAX display manual...
- Page 5 If the position is correctly set the new height can be saved by pressing The position is saved and the display stops flashing. The new height is also saved if no key is pressed within 5 seconds and the display stops flashing. = Attention › MAX display manual...
- Page 6 Amending the height in the display by using Press for higher. Press for lower. › Confirm with After confirmation the actual height can be read off of the display (display does not flash anymore) and the system is ready for further programming. › MAX display manual...
Need help?
Do you have a question about the MAX display and is the answer not in the manual?
Questions and answers