Advertisement
Quick Links
Advertisement
Summary of Contents for Montgomery Ward DJC158SCZ
- Page 1 18-Volt Cordless Drill & Worklight Instruction Manual Model: DJC158SCZ Item No.: 743503 Montgomery Ward Customer Service 1112 7th Avenue, Monroe, WI 53566 8:00 a.m. to Midnight, Monday through Friday Wards.com 1 3848 Wards.com 1 3848 • • • • •...
-
Page 2: Table Of Contents
PLEASE SAVE THESE INSTRUCTIONS bridge the gap between the battery terminals. © 2016 Montgomery Ward, Inc. All rights reserved. 4. Do NOT use tool if the power switch does not properly work. Any tool that cannot be controlled with the power switch is dangerous and must be replaced. - Page 3 Parts & Features Drill Important Safeguards (cont’d) CORDLESS POWER TOOL GENERAL SAFETY: 1. Power tool should be switched to OFF when installing battery to avoid equipment damage and personal injury. 2. Do NOT expose power tools to extreme temperatures or fire. 3.
-
Page 4: How To Use The Drill
Drilling Tips How to Use the Drill Prior to Use • When drilling into a slippery surface, such as tiles, place a piece of masking tape on the surface to help prevent the bit from slipping. 1. Charge the battery following the instructions in this manual. 2. -
Page 5: Parts & Features Worklight
Troubleshooting Parts & Features Worklight Problem Possible Cause Remedy The drill does not start. Battery discharged. Recharge the battery. Overload protection shut Allow motor/battery to cool down the tool/battery. down then restart. Faulty power trigger. Contact Customer Service. The drill is slow and/or Blunt/damaged drill bit. -
Page 6: Year Limited Warranty
(excluding shipping and handling charges). for one year from provable date of purchase. Please send returns to: Within this warranty period, Montgomery Ward will repair or Montgomery Ward, Inc. replace, at its option, defective parts of this...