Summary of Contents for Maury Microwave MT1020B
- Page 1 User Guide Automated Tuner System Power Distribution Hub Model MT1020B MT1020-340 (Rev B) 12/11...
- Page 3 User Guide Automated Tuner System Power Distribution Hub Model MT1020B 2900 Inland Empire Boulevard Ontario, California 91764-4804 USA Phone: (909) 987-4715 Facsimile: (909) 987-1112 maurymw.com MT1020-340 (Rev B) 12/11 Copyright © 2011 Maury Microwave Corporation. All rights reserved.
- Page 5 Maury Microwave hardware products are warranted against defects in materials and workmanship for a period of one year from date of shipment. During the warranty period, Maury Microwave will, at its option, either repair or replace products which prove to be defective.
-
Page 7: Table Of Contents
Contents General Information ......................1 MT1020B Automated Tuner System Power Distribution Hub..........1 Specifications ........................1 Accessories Supplied......................1 Installation ........................3 Power Requirements......................3 Ground Requirements......................3 Operational Temperature and Humidity................3 ... - Page 8 Tables Table 1. Safety Symbol Definitions....................2 Figures Figure 1. Power Entry Module with Fuse Holder................3 Figure 2. Front Panel........................4 Figure 3. Rear Panel ........................4 Figure A 1. Packaging Kit .........................5 MT1020-340 (Rev B) 12/11...
-
Page 9: General Information
MT1020B Automated Tuner System Power Distribution Hub The MT1020B Automated Tuner System Power Distribution Hub is designed to provide power and interface control for the Maury USB series of automated mechanical tuners. As many as four units may be controlled through this device. -
Page 10: Table 1. Safety Symbol Definitions
Table 1. Safety Symbol Definitions MT1020-340 (Rev B) 12/11... -
Page 11: Installation
Operating the instrument outside the temperature range for extended periods will result in degradation of electrical performance and eventual malfunction. NOTE: Because the MT1020B is fan cooled, it must be installed in a location that allows sufficient (non- restricted) space below the instrument case for adequate circulation of air. -
Page 12: Operation
Operation WARNING: Always set the MT1020B power switch to the OFF position before installing or removing the combination USB/Power cable assembly to prevent possible damage to the instrument. • Set the power switch to the OFF position. • Inspect each connector on the tuner, controller and cable assembly to ensure that all connections are clean and undamaged. -
Page 13: Appendix
Appendix Shipping Package If it becomes necessary to return the MT1020B ATS Power Distribution Hub to the factory for warranty, repair or maintenance, it is important to protect the unit during transit. To insure this, use of the original packaging materials is suggested. -
Page 14: Data Sheet Resources
Data Sheet Resources 4T-068 – Automated Tuner System Power Distribution Hubs http://www.maurymw.com/pdf/applib/4T-068.pdf 4T-050F – Automated Tuner System http://www.maurymw.com/pdf/applib/4T-050F.pdf 4T-056 – Automated Tuners (0.25 to 8 GHz) http://www.maurymw.com/pdf/applib/4T-056.pdf 4T-072 – 7mm Automated Tuners (0.8 to 18 GHz) http://www.maurymw.com/pdf/applib/4T-072.pdf 4T-065 – 2.4mm Automated Tuners (8.0 to 50 GHz) http://www.maurymw.com/pdf/applib/4T-065.pdf 4T-074 –... - Page 15 Contacts Corporate Maury Microwave Corporation 2900 Inland Empire Boulevard Ontario, California 91764-4804 United States of America 909-987-4715 909-987-5855 eMail maury@maurymw.com Sales 909-204-3224 909-987-1112 eMail maury@maurymw.com Customer Support 909-204-3283 909-987-1112 eMail support@maurymw.com Web Site http://maurymw.com Web Resources Visit our web site for additional product information and literature.
Need help?
Do you have a question about the MT1020B and is the answer not in the manual?
Questions and answers