Table of Contents
Advertisement
Install the sidespray (sidespray models
only)
Position the sidespray holder on the mounting surface.
Install and tighten the mounting nut.
Thread the sidespray hose through the handspray holder.
Sit the sidespray in the holder.
Install the double check valve adapter with washer on the
sidespray connection on the faucet.
Connect the sidespray hose to the adapter. Hold the
adapter firmly with one wrench while tightening the hose
nut with a second wrench.
Turn on the water and check all connections for
leaks.
User Instructions
Pivot the handle out to turn the water on. Pivot it forward to make the water cooler, to the rear to
make it warmer.
To use the sidespray, turn the water on. Pull the sidespray out of the holder. Press and hold the
trigger on the back of the sidespray.
Water will still come from the spout when the sidespray is turned on.
washer
adapter
sidespray hose
5
Advertisement
Table of Contents
