Vanson BC-612V Operating Manual

Vanson BC-612V Operating Manual

Automatic charger for lead-acid batteries 6 / 12v

Advertisement

Page 1
Operating manual Automatic
charger for lead-acid batteries 6 / 12V.
Model BC-612V.

Precautionary measures:

Before using the charger, read the instructions.
This charger is designed to charge only lead-acid batteries.
Attempts to charge other types of batteries can damage your device.
Do not expose the charger to moisture.
Unplug the charger from the mains when not in use.
Do not use extra cords are not recommended by the manufacturer,
together with the memory. Otherwise, it may result in fire, short circuit or
bodily injury.
Do not disassemble the charger by yourself, if it is exposed to short
circuit or been mechanically damaged. Contact a qualified
expert.
To clean the device, disconnect it from the mains, use a damp cloth,
Do not immerse in water.
Charger can be used with children under the supervision of adults or age 8letnego
with the proviso that it explained the potential risks and safe operation with the
principles
device. Cleaning the unit should be done only under the supervision of
adults.

Description and features:

Charging lead-acid batteries 6 / 12V all brands
Automatic detection of the charge voltage
Wide range of input voltage 100-240V
LED charging indicator

Specifications:

Input voltage
100-240V 50-60Hz
Output voltage

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BC-612V and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Vanson BC-612V

  • Page 1 Page 1 Operating manual Automatic charger for lead-acid batteries 6 / 12V. Model BC-612V. Precautionary measures: • Before using the charger, read the instructions. • This charger is designed to charge only lead-acid batteries. Attempts to charge other types of batteries can damage your device.
  • Page 2 6 / 12V 800mA tap battery Rechargeable lead- 5-8Ach acid 6V, 12V 5-8Ach Operation memory Connect the charger to the battery terminals: red to the positive (+) terminal, black to the negative (-) battery terminal, - so that the terminals are not contact with each other.

Table of Contents