Advertisement
Quick Links
VIS131.1 VIS131.2 Operation Manual
The digital LED controller is designed to control our LED digital tube.One controller can control 8pcs LED
digital tube.The controller together with the LED digital tube can make colorful and dynamic light scenery
effects.It can be controlled by DMX controller and Art-net.
A,Parameter Of LED digital tube controller system
LED digital tube controller specification :
Power input:AC120V/240V 60Hz/50Hz
Power consumption:350W max
Power output:DC12V,eight 3-pin output power cable with female connector.Each output power cable connect 1
LED tube
DMX input and output:3-pin male XLR socket and 3-pin female XLR socket
Types of lights can be controlled:1 meter tube light and 2 meter tube light
Weight:3.4kgs
Dimension:L49*W27*H7.2cm
2×8 character LCD display
Built-in microphone
IR remote control available
Control:512 DMX console and Art-net control
- AC120V /AC 240V input voltage switch
- LCD display for DMX addressing and work mode setting
- Universal DMX512 (1990) multiplexed digital control
- Selectable 24 jumping modes&24 dreaming modes&24 sound active modes in stand alone mode
LED digital tube specification :
Power input:DC12V,3-pin input power cable with male connector
Power consumption:18W per LED tube---(1M);36W per LED tube---(2M)
LEDs:54pcs 0.164W(3 in 1)---(1M);108pcs 0.164W(3 in 1)---(2M)
Weight:0.26kg---(1M);0.5kg---(2M)
Dimension:Ø25*1000mm---(1M);Ø25*2000mm---(2M)
Pixels:27 pixels---(1M);54 pixels---(2M)
Each pixel of LED tube can be controlled individually via Art-net control
Color of tube:Clear PC
Visible for 360 degree
Each 3-pin input power cable can be extended to 20 meters at most
B,All the system controlled by DMX controller
1.The link picture for the total LED digital tube controller system:
1 of 12 pages
Advertisement
Summary of Contents for Pixel VIS131.1
- Page 1 LEDs:54pcs 0.164W(3 in 1)---(1M);108pcs 0.164W(3 in 1)---(2M) Weight:0.26kg---(1M);0.5kg---(2M) Dimension:Ø25*1000mm---(1M);Ø25*2000mm---(2M) Pixels:27 pixels---(1M);54 pixels---(2M) Each pixel of LED tube can be controlled individually via Art-net control Color of tube:Clear PC Visible for 360 degree Each 3-pin input power cable can be extended to 20 meters at most B,All the system controlled by DMX controller 1.The link picture for the total LED digital tube controller system:...
- Page 2 Note: 1) Every controller has 8 outputs,every output of the controller can link 1pc tube light.So every controller can control 8pcs lights at most. 2) The controller can control 2 types of tube lights:1 meter tube light and 2 meter tube light.Please refer to TUBE LIGHT TYPE SET MODE in OTHER MODE to set the controller to control the 2 different lights.The 1 meter tube light has 27 pixels,2 meter tube light has 54 pixels.Each pixels occupies 3 channels,so each 1 meter tube light occupies 81 channels,each 2 meter tube light occupies 162 channels.
- Page 3 Green dimmer MANUAL GREN:××× Adjust the intensity of the green color,000 is off,255 is the brightest. Blue dimmer MANUAL BLUE:××× Adjust the intensity of the blue color,000 is off,255 is the brightest. Flash MANUAL STROB:×× Adjust the flash speed,00 is flash off,01 is slowest,15 is fastest SOUND Mode select...
- Page 4 NET MODE U4:××××× Set the output DMX universe 4 from 1to 32767 2.1 Manual dimmer color mode Press"MODE"button,select the manual dimmer color mode.There are three modes in the sound active program mode.You can select them by pressing the"SET UP" button. LED tube select mode Press"SET UP"button, select the LED tube select mode.At this time,the LCD displays "MANUAL TUBE:ALL/×...
- Page 5 ",then press"UP"or "DOWN"button to select the LED tube.When"STATIC TUBE:ALL" is displayed means that you can select static color for all the LED tubes,When"STATIC TUBE:01~08" is displayed means that you can select static color for the corresponding single LED tube.For example:"STATIC TUBE:01"represent the LED tube 1 and so on.
-
Page 6: Dmx Protocol
Press"SET UP"button,select the DMX universe output set mode.At this time,the LCD displays"NET MODE U1:× ××××",press"UP"or "DOWN"button to set the output DMX universe from 1to 32767.Then press SET UP button to select the output DMX universe 2 "NET MODE U2:×××××",the output DMX universe 3 "NET MODE U3: ×... - Page 7 224-255 White 0-10 Color jumping 1 11-20 Color jumping 2 21-31 Color jumping 3 32-42 Color jumping 4 43-52 Color jumping 5 53-63 Color jumping 6 64-74 Color jumping 7 75-84 Color jumping 8 85-95 Color jumping 9 96-106 Color jumping 10 Color 107-117 Color jumping 11...
- Page 8 192-202 Color dreaming 19 203-212 Color dreaming 20 213-223 Color dreaming 21 224-234 Color dreaming 22 235-244 Color dreaming 23 245-255 Color dreaming 24 0-10 Sound mode 1 11-20 Sound mode 2 21-31 Sound mode 3 32-42 Sound mode 4 43-52 Sound mode 5 53-63...
-
Page 9: Auto Run Mode
CH No. DMX value Function 000~255 Dimming(dim→bright) 000~027 No function 028~255 Strobe(slow→fast) Red (dim→bright) 000~255 LED tube 1 Green (dim→bright) 000~255 LED tube 1 Blue (dim→bright) 000~255 LED tube 1 ┋ ┋ ┋ Red (dim→bright) CH24 000~255 LED tube 8 Green (dim→bright) CH25 000~255... -
Page 10: Dmx Mode
example:"STATIC TUBE:01"represent the LED tube 1 and so on. 2. When the controller goes into the static color select mode,press “+”and “-” to select the 7 colors.Press FLASH to turn on flash effect to in this situation, pressing “+” and “-” buttons to adjust the flash speed. Sound Active Mode Press SA button to cycle among sound active program select and sensitivity select mode.Each press of this button will change to the next mode. - Page 11 Note:Do not daisy-chain more than 50pcs LED controllers from the computer,and use an Ethernet Switch if more than 50pcs controllers are being controlled. Installation method 2: 11 of 12 pages...
- Page 12 Note:1.The Ethernet Switch must be Gigabit Switch. 2. Do not daisy-chain more than 50pcs LED controllers from a single network port of the Ethernet Switch. 3. Maximum 2 output network ports of the Ethernet Switch can be used.So the system can control 100pcs controllers maximum.