Table of Contents
Advertisement
Setup Menu
SETUP MENU
1=SETUP INPUTS
2=SETUP COMMON ALARM
3=SETUP ZONES
4=SETUP OUTPUTS
5=SETUP SYSTEM INFORMATION*
6=SETUP OPERATION
7=OVERRIDE OUTPUT
8=CLEAR ALARMS&LOGS
9=RETURN TO MAIN MENU
SELECT A NUMBER:
* Setup System Information features are:
•
Change Password
•
Set Date & Time/Automatic Daylight Saving Time
•
Setup Site ID
•
Backup and Upload Configuration File (Service Terminal Interface only)
•
Factory Defaults
•
Firmware Update (Service Terminal Interface only)
Note that two of these system features—Backup and Upload Configuration File and Firmware
Update—are unique to the Service Terminal Interface.
Tips on Using the Service Terminal Interface
Use the following tips when making changes in the Service Terminal Interface:
•
Data that can be entered is shown in parentheses ( ) in prompt line.
•
The current setting is shown in brackets [ ] in the line below the prompt
•
To accept the current setting, press the Enter key.
•
To change the current setting, enter the value and then press Enter.
•
Pressing Escape will exit the current setup function or take you to the previous menu screen.
Setup Inputs
For details on this feature, see
Vertiv | Liebert® AC4 User Manual |
See:
Description
Setup Inputs
Configure digital inputs
Setup Common
Set up the common alarm to reset with silence
Alarm
Setup Zones
Define areas with 2-4 devices each
Setup Outputs
Configure digital outputs
Setup System Info
Set up features such as password and date & time*
Setup Operation
Set up rotation sequence, standby testing
Override Output
Manually override automatic control of outputs
Clear Alarms &
Clear active alarms; clear alarm and event logs
Logs
Setup System - Setup Inputs
on page 44.
83
Advertisement
Table of Contents
