Advertisement
Quick Links
InstallatIon & MaIntenance
THiS iNSTALLATiON BOOkLET CONTAiNS iMPORTANT iNfORMATiON ON
TESTiNg AND MAiNTENANCE Of THE SMOkE DETECTOR.
PLEASE LEAVE THiS DOCuMENT OR A COPy ON THE PREMiSES.
RSM RADiO SMOkE DETECTOR
• Photoelectric smoke detection technology
• Test button to test sounder and transmitter
• Delayed transmit function for testing
• Sends Alarm, Restoral, Supervision & Low Batt
• High volume sounder on-board
• Compatible with all Ness receivers
• One 9V battery powers the smoke detector and
• Compact slimline housing
note to the Installer
1
signals
radio transmitter
REV 2.1
Advertisement
Summary of Contents for Ness 106-040
- Page 1 InstallatIon & MaIntenance RSM RADiO SMOkE DETECTOR • Photoelectric smoke detection technology • Test button to test sounder and transmitter • Delayed transmit function for testing • Sends Alarm, Restoral, Supervision & Low Batt signals • High volume sounder on-board • Compatible with all Ness receivers • One 9V battery powers the smoke detector and radio transmitter • Compact slimline housing note to the Installer THiS iNSTALLATiON BOOkLET CONTAiNS iMPORTANT iNfORMATiON ON TESTiNg AND MAiNTENANCE Of THE SMOkE DETECTOR. PLEASE LEAVE THiS DOCuMENT OR A COPy ON THE PREMiSES. REV 2.1...
- Page 2 IntroductIon Where not to Install The RSM radio smoke detector is designed for Do not install smoke detectors in areas where use as an optional radio accessory with Ness combustion particles are present. install at least alarm systems. 6m away from sources of combustion such as heaters, stoves, furnaces, water heaters. Avoid The photoelectric smoke detector and on-board poorly ventilated areas.
- Page 3 WALL prograMMIng to a receIver. The transmitter sends a radio learn message on power up, (when you connect the battery). for programming to a Ness control panel or Diagram 2. standalone receiver refer to the manuals for those products. 10cm Before connecting the battery, press and hold...
- Page 4 Smoke sensor will chirp once every 30 seconds until the battery is replaced. The radio transmitter will send a low battery signal once per hour. until sensing chamber is clear of smoke. alarM perIod operatIng voltage 9V Alkaline battery current draW Standby <15µA, Alarm <12mA radIo transMItter type SAWR stabilised radIo frequency 304MHz, 868MHz, 434MHz depending on model and region. radIo coMpatIbIlIty All Ness radio receivers. All Ness control panels with radio options fitted. 133mm diameter x 40mm dIMensIons 106-040 304MHz Standard Ness model. Models 106-041 868MHz / 106-042 434MHz Export models. 106-044 304MHz OEM model. RSM RADiO SMOkE DETECTOR www.nesscorporation.com iNSTALLATiON NOTES REV 2.1 Document Part Number 890-358 National Customer Service Centre Ph: 1300 551 991 for Ness RSM Radio Smoke Detector customerservice@ness.com.au Models 106-040, 106-041, 106-042, 106-044 Ness Corporation manufacturing processes are accredited to iSO9001 quality standards and all possible care and diligence has been applied during manufacture to ensure the reliable operation of this product. However there are various external factors that may impede or restrict the operation of this product in accordance with the product’s specification. These factors include, but are not limited to: 1. Erratic or reduced radio range. Ness radio products are sophisticated low power devices, however the presence of in-band...
Need help?
Do you have a question about the 106-040 and is the answer not in the manual?
Questions and answers