RCA 24V510T User Manual page 6

Connections and Setup
VCR
VIDEO AUDIO
OUT
R L
IN
R L
Note: The TV model shown here is
24F530T. The 24V510T does not include
the Y, Pb, Pr (Component Video jacks),
Audio Output jacks, or Subwoofer jack.
TV + DVD + VCR
1. Connect your DVD Player to your TV.
A. Connect the audio (white and red) cables to the VIDEO 1 R and L/MONO AUDIO jacks on the back
of the TV and to the Audio Output jacks on the DVD player (sometimes labeled L and R).
B. If your DVD player has an S-Video jack, connect an S-Video cable to the S-Video jack on the DVD
player and to the S-VIDEO jack on the back of the TV. If your DVD player doesn't have an
S-Video jack, go to 1D.
C. Model 24F530T only: If your DVD player has a component video jacks (Y,Pb,Pr), connect video
grade cables to the Component Video jacks on the DVD player and to the Y, Pb, Pr jacks on the
back of the TV. If your DVD player doesn't have component video jacks, go to 1D.
D. Connect a video cable (yellow) to the Video Output Jack on the DVD player and to the VIDEO jack
on the back of the TV.
2. Connect your TV to your VCR
Connect a coaxial cable to the ANTENNA IN jack on your TV and to the RF Output jack on your VCR
(sometimes labeled OUT TO TV).
3. Make sure cable or antenna is connected to your VCR.
Connect the coaxial cable from your cable outlet or antenna to the antenna input on the VCR
(sometimes labeled In From Antenna).
Note:
If you do not connect a cable, antenna, or another component to your TV, the TV will automatically
shut off after 15 minutes to save power.
4
OUT TO TV
CH3
2
CH4
IN FROM ANT
3
From Cable
or Antenna
-OR-
-OR-
TV (back panel)
ANTENNA IN
VIDEO
L (MONO)
R
S-VIDEO
1
1A
1D
DVD
1B
VIDEO L R
S-VIDEO
Y
Pb L (MONO)
Pr
R
SUB
WOOFER
2
VIDEO OUTPUT
1C
COMPONENT VIDEO
Y Pb Pr
Chapter 1