Table of Contents
Advertisement
Load indicator/
To activate, first open the door, set the programme and
recommended dosage
then load the items of laundry.
9
Follow the manufacturer's care information.
According to the information on the care labels.
According to type, colour, soiling and temperature.
Do not exceed the maximum load
Observe the important information
Detergents and care products
Amount of laundry, level of soiling, water hardness (ask your water supply company) and
Pour liquid detergent into the appropriate dispenser and place in the drum.
During operation: Open the detergent drawer with care.
Dilute thick fabric softener and care products with water.
This prevents blockages.
Open the door/set the programme**
**If the childlock is active
Follow the instructions in the display panel.
e selector
Start/
Reload
me selector for
g the machine on
nd for selecting the
Selecting individual settings
me. Can be turned
direction.
Setting the temperature/spin speed
Sorting the laundry
page 7.
page 9.
Measure accordingly:
manufacturer's instructions.
Models without insert for liquid detergent:
1
Deactivate, page 5.
Load laundry
2
Observe the load display on the
display panel
page 9
Add detergent and
3
care products
Observe the dosage
recommendation for detergent on the
display panel
page 9
4
Close the washing
machine door
page 5.
Select stain
page 6.
page 2.
Washing
Detergent drawer
with compartments I, II,
Washing machine door
Control panel
Washing machine door
handle
Drum interior light
(depending on model) comes on
when the door is opened or closed,
or when a programme is started;
goes out automatically.
5
Washing
Press
Start/Reload
3
Switching off
Turn the programme selector to Off.
Turning off the tap
Not required for AquaStop models
Removing the washing
Open the washing machine door and remove the washing.
If
Rinse stop (no final spin) is active: turn the programme selector
to
Drain or
Press
Start/Reload.
– Remove any foreign objects - risk of rusting.
– Leave the washing machine door and detergent drawer
open so that any residual water can dry.
Programme finished when ...
... Finished, Remove washing appears on the display panel.
If the display panel lighting is off, press any button
Cancelling the programme
Programmes at high temperatures
– Cool laundry: Select
6
– Select
Programmes at lower temperatures:
– Select
– Select
Changing the programme, if ...
... you have selected the wrong programme by mistake:
Service flap
– Reselect the programme.
– Press
beginning.
Adding laundry, if ...
...
Start/Reload is selected and Top-up possible appears on the
display panel.
– Do not leave the washing machine door open for too long
as water from the washing could leak out.
– Load display not active when reloading.
Press
Start/Reload.
Installation instructions, page 7.
Spin. Select the spin speed if necessary.
Energy saving mode, page 1.
Rinse.
Start/Reload.
Spin or
Drain.
Start/Reload.
Start/Reload. The new programme starts from the
page 6
4
Advertisement
Table of Contents
