Sharp LC-60LE360X Service Manual page 13

LC-60/70LE360X
[2] Removing of connectors & PWB
1.Disconnect the following connectors from Main Unit. (SP,RA,KM,LW wires)
2.Disconnect the following connectors from the POWER Unit.(PD,PL,LED wire)
3.Disconnect the following connectors from the LCD CONTROL Unit .(T-Con FFC wayer)
4.Remove 4screws [1]Main Unit ,remove 6 screws [2] Power unit & remove 4 screws [3]
T-CON board.
[ LED Wire ]
[PD/PL]
[LW LVDS FFC]
[2]
POWER UNIT
MAIN UNIT
[SP]
[RM/KM]
T-CON
[ T-CON FFC WIRE ]
5 – 3