Summary of Contents for Peakworks E4
- Page 1 WWW.PEAKWORKS.CA SHOCK ABSORBING LANYARDS CERTIFIED TO: CSA Z259.11 Peakworks Inc 6-6150 Highway # 7 Suite 407 Vaughan, Ontario L4H 0R6 Tel. 1-877-887-3259 Fax 416-352-1644 Email sales@peakworks.ca www.peakworks.ca...
- Page 2 ...
- Page 3 Z 359.1. It should be used as part of the fall protection training program required by law. All PeakWorks’ products are designed and engineered to meet or exceed applicable CSA and ANSI standards along with labour ministry requirements. WARNING: All persons using this equipment must read and understand all the instructions and warnings contained in this manual.
- Page 4 WWW.PEAKWORKS.CA FALL CLEARANCE Fall Clearance is the distance required to safely arrest the users fall. It is the distance from the anchorage to the ground. A Fall Clearance Calculation must be done anytime this or any other fall protection equipment is use.
- Page 5 WWW.PEAKWORKS.CA SHOCK ABSORBING LANYARD OVERVIEW All PeakWorks’ Shock Absorbing Lanyards have been designed and engineered to meet or exceed all applicable standards and Ministry of Labour requirements. SHOCK ABSORBING LANYARD CLASSIFICATION & RATINGS There are two classifications of shock absorbing lanyards, E4 and E6...
-
Page 6: Care And Storage
CONNECTING TO A ROPE GRAB (FALL ARRESTER) OR SELF RETRACTING LIFELINE PeakWorks does not recommend connecting a shock absorbing lanyard to either a rope grab or a self retracting lifeline. Please contact PeakWorks for additional information. - Page 7 A competent person must inspect this equipment annually. PeakWorks offers a professional RFID based inspection system. Please contact PeakWorks for more information. The following guide should be used to inspect your Shock Absorbing Lanyard.
- Page 8 Mettez l’appareil hors SHIPMENT. FAILURE TO DO SO service immédiatement si COULD RESULT IN SERIOUS INJURY OR DEATH. PLEASE le cordon ayant arrêté de CONTACT PEAKWORKS INC. IF chute. YOU REQUIRE A MANUAL. MODEL #: SA-1000-6 CLASS: E4 INITIAL LENGTH: 6 FT (1.8m) DEPLOYED LENGTH: 10 FT (3.05m)
- Page 9 LANYARD IDENTIFICATION IDENTIFICATION DE CORDON PROTECT THE LANYARD FROM COMING IN CONTACT WITH SHARP EDGES, ABRASIVE SURFACES, SPARKS FROM GRINDING AND WELD SPATTER. ANY OF THESE HAZARDS MAY DAMAGE THE LANYARD WHICH COULD CAUSE THE LANYARD NOT TO PERFORM AS DESIGNED IN THE EVENT OF A FALL, THUS RESULTING IN SERIOUS INJURY OR DEATH.
- Page 15 ...