Advertisement
User Manual
1.Introduction
T h i s w i r e l e s s p r e s e n t e r i s s u i t a b l e f o r a n y
presentation or PowerPoint occasion. With it, you
don't need to stand beside your computer or have an
assistant. It is very simple to use, just plug and play,
and no driver is required.
The device enables you to control your presentation
wirelessly up to 10 metres (32 feet) away, thanks to
the advanced Radio Frequency (RF) technology that
works through walls.
It combines the functions of a laser pointer and
remote control. It is tailored as a convenient tool for
presentations, teaching, meetings, speeches and
training etc.
2. Operating System
The device supports Windows 98 / ME / 2000 / 2003 /
XP / Vista / 7/ 8, Linux and Mac OS
3. Parts & Functions
3.1 Front
- 1 -
Slide Show Screen On / Off
Laser
Page Up
3.2 Back
Take out the USB receiver
Once the USB receiver is connected to a computer, it would
normally detect the signal sent from the presenter automatically,
if however it does not due to interference caused by other
devices, press Connect to re-establish the connection.
4. Battery Installation
The unit is powered by 1 x AAA battery
Remove the battery compartment cover
Insert 1 x AAA battery into the battery holder
Put the battery compartment cover back in position
Page Down
Start / End Slide Show
Connect
- 2 -
Advertisement
