INSTRODUCTION Ultrasonic cleaner is on based of cavitation effect caused by high frequency ultrasonic wave vibration signal in fluid. Microscopic bubble are formed and they implode violenty that cause cavitation, which gives out great impact of the cleaning subject and provides an intese scrubbing action on the surface of cleaning subject. Additional, the bubbles are small enough to penetrate even microscopic crevices, cleaning them thoroughly and consistley.
Page 4
DESCRIPTION 1) Lid 2) Stainless steel tank 3) Plug and cord 4) Indication light 5) Timer setting key 6) Power on key 7) Power off key...
Page 5
OPERATING INSTRUCTIONS Open the lid, and fill the stainless steel tank with water The item should be immerged well into the water. However, do not exceed the “MAX-” mark. Close the lid, and plug in. Touch”SET” key and select from 5 optional working cycles freely: 180s ->...
CLEANING PROCESS Please observe any national safety regulations that may apply in addition to the present instructions. Observe the general safety warnings. The operator is responsible for the control of the cleaning result. Take the warming of the cleaning liquid into consideration when cleaning temperature- sensitive items.
Page 7
MAINTANANCE / CARE Caution! Pull the mains plug before you carry out any maintenance and care works! Do not put the unit under water! For repair return the unit to your supplier or to the manufacturer. Electrical safety: Regularly check the housing and the mains cable for damage to avoid electrical accidents. Care of transducer tank: The deposits in the stainless-steel tank can be removed gently, e.g.