Summary of Contents for Brighton E-bikes C965
- Page 1 C965 LCD Display User Manual Supplier Brighton E-bikes Ltd. Stanford Gate, South Road Brighton, East Sussex BN1 6SB TEL: 01273 930700 Email: brightonebikes@gmail.com www.brightonebikes.co.uk...
-
Page 2: Product Name
1. Product Name C965 intelligent LCD Display 2. Electrical Parameters 24V/36V battery supply (48V optional) Rated operating current: 10mA Max operating current: 30mA Off leakage current < 1uA Max output current to controller: 50mA ... - Page 3 4. Features Ergonomic easy to operate external button. Speed display: AVG SPEED, MAX SPEED and SPEED (Real-time). Kilometre / Mile: Can be set according to customers’ preference. Battery indicator The brightness of the backlight adjustable: 5-sections. ...
-
Page 4: Lcd Display Symbols
5. LCD Display Symbols 6. Functional Description 6.1 Power On/Off Press and hold the ‘Power button for 1 second to turn the display on or off. The display will automatically shut down when there is no operation or riding for a set number of minutes. This can be set from 0~9 minutes via the basic menu. - Page 5 Assist operation 6.3 Speed and Mileage display modes A short press of the ‘POWER’ button will change the display mode in the following order: Trip->Time->ODO->Power-> AVG Speed->MAX Speed. Speed and Mileage display modes *If there is no operation for 5 seconds, display will return to the Speed (Real- Time) display automatically.
- Page 6 6.4 Backlight On/Off Press and hold the UP button for 1 second to turn the backlight on or off (indicated by the headlight symbol). 6.5 Walking mode Walking mode will assist you in pushing your bike at around 6km/h. Press and hold the DOWN button to start walking mode and release button to stop.
-
Page 7: Basic Parameter Settings
7. Basic Parameter settings To enter the basic menu press and hold the ‘UP’ and ‘DOWN’ buttons together for 1 second, the ‘n’ symbol will flash to indicate you are in the basic menu. The display will automatically exit the basic menu if there is no activity for 10 seconds. - Page 8 7.3 Kilometres / Miles The symbol ‘S7’ is displayed. Press the UP or DOWN button to change between Km (Km/h) and Mile (MPH), then press the POWER button to confirm. 7.4 Auto off time The symbol ‘OFF’ is displayed. Press the UP or DOWN button to change the value, the range is 1 to 9, the number represents the delay time in minutes, before the display shuts down automatically.
- Page 9 8. Password Protected Menu To get to the password protected menu you must first enter the basic menu by pressing the ‘UP’ and ‘DOWN’ buttons simultaneously. Now repeat this to enter the password protected menu. To use the menu you must enter a 4 digit password. The default password is “0512”.
- Page 10 8.2 Wheel diameter The symbol ‘Wd’ is displayed. Use the UP or DOWN button to select your wheel diameter in inches. The range is: 8/10/12/14/16/18/20/22/24/26/27/28/29 Selecting the wrong value will cause speed and distance errors. 8.3 Speed limit The current speed limit value is displayed; the default value is 27Km/h. Use the UP or DOWN buttons to modify the value from 10 to 99Km/h, although the upper speeds would probably not be achieved due to restrictions within the motor and controller.
- Page 11 8.5 The Current temperature： The ‘b01’ symbol is displayed together with the current temperature value. 8.6 The Maximum temperature: The ‘b02’ symbol is displayed together with the maximum temperature value. 8.7 The lowest temperature: The ‘b03’ symbol is displayed together with the lowest temperature value. 8.8 The total voltage: The ‘b04’...
- Page 12 8.9 Current: The ‘b05’ symbol is displayed together with the current value. 8.10 Average current: The ‘b06’ symbol is displayed together with the average current value. 8.11 The remaining capacity: The ‘b07’ symbol is displayed together with the remaining capacity value. 8.12 Full charge capacity: The ‘b08’...
- Page 13 8.13 The relative state of charge: The ‘b09’ symbol is displayed together with the relative state of charge value. 8.14 The absolute state of charge: The ‘b10’ symbol is displayed together with the absolute state of charge value. 8.15 Cycle: The ‘b11’...
- Page 14 8.17 No recent charging time: The ‘b12’ symbol is displayed together with the no recent charging time.
-
Page 15: Error Codes
9. Error Codes If there is a problem with your E-bike an error code will be displayed. The engine icon will appear with an error code ranging from 01H~FFH. See table below for error code descriptions. Error Code Error description Error display 0x01 Normal... - Page 17 10. Assembly instructions Please pay attention to the screw’s torque value; damage caused by excessive torque is not within the scope of the warranty. There are 2 directions for the clamp installation, forward or backward. Different assembly methods will need different cable length.
- Page 18 Clamps are suitable for 3 sizes of handlebar, 31.8mm, 25.4mm, and 22.2mm, there are transfer rings for 25.4mm and 22.2mm. Transfer rings must be assembled in the correct direction as illustrated by the green arrow below. 11. Assist level instructions The range of assist levels can be selected (see section 8.4), the highest number of levels is 9, see the table below to see how 3 and 5 levels correlate to 9:...