RCA F19426 User Manual page 26

Using the TV's Features
Grid guide
menu
selection
24
15720240.02 Features
Grid guide
Grid Guide Action Buttons
action buttons
Action buttons will change according to where you are in
the GUIDE Plus+ system. Be sure to look at the action
bar before pressing the command numbers.
When highlighting the program, the following Action
buttons appear:
•
•
•
The program information window will display a
confirmation when you have successfully scheduled a
program to watch or record.
When highlighting the Channel names (the left column
on the channel listing), the following Action buttons
appear:
•
•
24
Watch Press 1 on the remote to place a timer in the
Schedule for the TV to turn on and tune to the
program highlighted in the channel listing. When the
TV turns on, the GUIDE Plus+ system will
automatically appear with the scheduled program
highlighted and tuned in the video window.
Go To Press 2 on the remote to bring up the direct
dial box and enter the number of the channel you
want. This will highlight the channel and current
program in the channel listing of the Grid Guide.
Press OK to tune to the highlighted channel. If the
video window is unlocked, it will automatically tune
to the channel.
Record Press 3 on the remote to place a timer in the
Schedule for the VCR to record the program
highlighted in the channel listing.
If you have a cable box, changing channels on the
TV will not cause the cable box channel to change
while recording.
Record will only appear if you have set up GUIDE
Plus+ system and specified your VCR type.
Note: If you have selected two programs to watch
or record which begin at the same time or
overlap, you will receive a timer conflict message.
You must choose between the two programs.
Lock/Unlock Press 1 to lock or unlock the video
window to either stay at one channel as you browse
the GUIDE Plus+ system (lock) or change as you
browse through different channels (unlock).
Go To Press 2 on the remote to bring up the direct
dial box and enter the number of the channel you
want. Press OK to highlight the channel and current
program in the channel listing of the Grid Guide. If
the video window is locked, press OK to tune to the
highlighted channel. If the video window is
unlocked, it will automatically tune to that channel.
4/9/02, 1:00 PM
Chapter 2