Advertisement
Remote control • Use
You can comfortably control the functions
of your iPod using the remote control
supplied. The drive functions are related to
those of an iPod.
1 . ON/Standby
2 . Menu scroll up
3 . Menu
4 . Previous track
5 . Enter
6 . Play / pause
7 . Treble control
8 . Bass control
9 . Reset
10 . Menu scroll down
11 . Next track
12 . Volume
Changing the batteries
When inserting batteries, ensure that the "+"
and "-" poles exactly match the "+" and "-"
positions of the battery compartment.
1 . Start
Switch on the appliance using
the standby button on the
remote control. A LED will first
flash then light up continuously.
The iPod is only charged when
the Start button has been pressed once.
Pressing the button again starts playback
mode.
2 . iPod control
Using the remote control
corresponds to the normal
iPod control.
3 . Volume
The "+" and "-" buttons
increase and decrease the
volume. During the change
the LED will flash. If the
maximum or minimum level
is reached the LED will light up
continuously.
4 . Treble control
The "+" and "-" buttons
increase or reduce the
amount of treble. During
the change the LED will
flash. If the maximum or
minimum value is reached the LED will light
up continuously.
5 . Bass control
The "+" and "-" buttons
increase or reduce the
amount of bass. During the
change the LED will flash. If
the maximum or minimum
value is reached the LED will light up
continuously.
6 . Reset
This button returns the
appliance to its original
state.
Information
Do not drop the remote
control or step on it. This
could result in damage
that could cause the
remote control to stop
working.
If the remote control is
going to be out of use for
a longer period, please
remove the batteries to
prevent leakage.
Do not expose the
remote control to
unnecessary extra light.
Do not use the iTeufel®
Dock remote control at
the same time as other
remote controls.
Technical data
You can find the technical
data on our website.
· iTeufel
®
Dock
7
Advertisement
