Installation
5-Port or 8-Port 10-Gigabit/Multi-Gigabit
Ethernet Unmanaged Switch With 1 SFP+ Port
Universal Pro Series XS505M and XS508M
Package Contents
•
Switch (XS505M or XS508M)
•
Power cable (localized to the country of sale)
•
Rack-mount kit for rack installation
•
Rubber feet
•
Installation guide
Step 1. Connect the equipment.
Connect an Ethernet port or the SFP port on the switch to your router.
Connect the other ports on the switch to network devices.
Sample connections
Internet
Network router
10G link
XS508M switch
to 10 G NAS
MS510TXPP switch
1G link to
2.5G link to 2.5 G
2.5G PoE link
computer
gaming computer
to WAC740 AP
Step 2. Connect to power.
Step 3. Check the status.
Power LED
Ethernet port LEDs for ports 1–4 (XS505M) and 1–7 (XS508M)
On
Off
10G
fiber link
to switch
Fan LED
Check fan
Normal
SFP port LEDs (round)
Or, for port 8 (XS508M), Ethernet port LEDs (rectangular)
10G link to 10G
computer with a
Thunderbolt port
Note:
On model XS508M, port 8 is a combo port that lets you establish a 1G or 10G
connection on either the Ethernet RJ-45 port (marked 8) or the SFP+ port (marked 8F).
You cannot use both ports (8 and 8F) simultaneously.
10G link (both port LEDs on). Both port LEDs blinking
indicates traffic activity.
5G link (left port LED off, right port LED on). Right port
LED blinking indicates traffic activity.
2.5G link (left port LED on, right port LED off). Left port
LED blinking indicates traffic activity.
1G or 100M link (both port LEDs on). Both port LEDs
blinking indicates traffic activity.
No link (both port LEDs off).
10G link (both port LEDs on). Both port LEDs blinking
indicates traffic activity.
1G link (both port LEDs on). Both port LEDs blinking
indicates traffic activity.
No link (both port LEDs off).