GENERAL CHARACTERISTICS The “V260” valves represent an essential element for the realisation of systems of various types and for various uses SOFTENING (decalcification)- single, duplex or on more columns for domestic or industrial use DEMINERALISATION single o duplex, for all uses which require water with guaranteed quality characteristics.
. For further details regarding the timers, see the table of timer choice (pag. 21) N.B. Among the accessories of the V260, note the kit code 5100-260 of the backwash valve, the bypass of unpurified water towards use, during the regeneration phase, can be avoided.
FLOW CONTROL SYSTEMS The S.I.A.T.A. flow control system is composed of 3 parts, see page 1: 1. The flow delivery with 2 or 4 drill holes cod. 5124 or 5124-4 2. The flow cod. 70-* (with various dimensions) 3. The flow delivery part cod 5228 In the solution proposed in fig.
MAINTENANCE ADVISE Problem Cause Corrective action Drain leaking while in Pilot leakage Disconnect alternately connections 2 and 4, see page 12. service or on stand-by If water is leaking from one of the two pressure connections, this means that the relative pilot has leaks and should be replaced.
Need help?
Do you have a question about the V260 and is the answer not in the manual?
Questions and answers