Sarotech abigs DVP-260 User Manual page 33

4) Remove the abigs from the PC and turn on the power by connecting the abigs to the TV.
5) Move to the [SYSTEM SETUP]/[System] screen and press the "▲, ▼" button and the "OK" button
from the "Start the Firmware Upgrade" item.
6) Press the "▲, ▼" button from the reconfirm message window and move to the "Yes" location. Press
the "OK" button to see the window for upgrade. The firmware upgrade will begin.
If users want to cancel the firmware upgrade, press the "OK" button from the "No" location.
7) After the firmware upgrade is completed, abigs automatically restarts.
* Reference
If the "Upgrade Firmware Version" is higher than the "Current Firmware Version", start the upgrade.
33