Advertisement
Step 1
E
A
A
A
Take the bottom surround pole item (A) ensuring the spring pin is facing outwards insert the
enclosure bolt (E) through the hole in enclosure pole then take the black plastic spacer and
place over the bolt, now insert through the hole at the top of the trampoline leg, take the nut
and secure loosely, repeat the above step with the bottom hole. Fully tighten all nuts, then
repeat this step on all of the remaining legs.
Step 2
D
B
C
Take the top surround pole item (B) and place over the middle surround pole item (C), depress
the spring pin on (C) and push poles together ensuring the spring pin locates in the hole you
may have to twist the poles until the pin clicks into place. Repeat this step with the remaining
enclosure poles. Next take the enclosure poles and insert into the surround mesh pockets on
item (D) ensuring that the protective foam fully covers the poles (B&C) whilst inside the pockets.
Page 3 of 6
Advertisement
