jotron Phontech 7200 User Manual
  1. Manuals
  2. Brands
  3. jotron Manuals
  4. Switch
  5. Phontech 7200
  6. User manual

jotron Phontech 7200 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
USER MANUAL
Phontech 7200
www.jotron.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Phontech 7200 and is the answer not in the manual?

Questions and answers

Summary of Contents for jotron Phontech 7200

  • Page 1 USER MANUAL Phontech 7200 www.jotron.com...

  • Page 2: Table Of Contents

    Table of contents List of figures Abbreviations General Standards Product description Product image Phontech 7200, 24 PoE Ethernet GBit Switch System description Major functions 6.1.1 Management 6.1.2 Monitoring and troubleshooting 6.1.3 Network configuration 6.1.4 Advanced security 6.1.5 Power over Ethernet (PoE) 6.1.6...
  • Page 3 Cable requirements for power lines Cable requirements for Ethernet 8.10 Using 802.3AF-2003 PoE for VoIP telephones Configuration Command line interface (CLI) 9.1.1 CLI requirements 9.1.2 Starting the command line interface 9.1.3 Setting up the IP address 9.1.4 Changing the password 9.1.5 Command line help 9.1.6...
  • Page 4 Test and maintenance records Warranty 13.1 Warranty claims 13.2 Service 13.3 Service agents Spare parts Recycling and disposal Page - 4 -...

  • Page 5: List Of Figures

    Figure 6 Phontech 7200, 24 PoE Ethernet GBit Switch - rear view AC/AC version Figure 7 Phontech 7200, 24 PoE Ethernet GBit Switch - front view - mini USB connector Figure 8 Phontech 7200, 24 PoE Ethernet GBit Switch - powering VoIP phones...

  • Page 6: Abbreviations

    Abbreviations AC/DC Alternating current/Direct current Access Control List Command Line Interface CMOS Complementary Metal-Oxide Semiconductor Direct current (input) DHCP Dynamic Host Configuration Protocol DWRR Deficit Weighted Round Robin LACP. Link Aggregation (control protocol). Energy Efficient Ethernet Electronic Industries Alliance Electromagnetic compatibility HTTP Hypertext Transfer Protocol Integrated circuit (system)
  • Page 7 Telecommunications Industry Association Universal Serial Bus Unshielded twisted pair Volts Alternating Current Volts of direct current VoIP Voice over Internet Protocol VLAN Virtual Local Area Network Weatherproof (unit) Page - 7 -...

  • Page 8: General

    Jotron develops and manufactures professional and state of the art products and communication systems for usage in air, on land and at sea. Jotron supplies products and services that comply with the latest applicable standards. The use of modern test instrumentation and detailed test procedures ensures that you are supplied with quality products.

  • Page 9: Standards

    Standards The Phontech 7200, 24 PoE Ethernet GBit Switch has been verified, tested and meets the following product standards: EMC: EN60945 (2002), EN61000-4-2,EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6 Environmental: EN60945 (2002), EN60068-2-1, EN60068-2-2, EN60068-2-6, EN60068-2- 30, EN60068-2-52 Ingress protection: IEC 60529 Certification for marine...

  • Page 10: Product Description

    Product description The Phontech 7200, 24 PoE Ethernet GBit Switch includes 24 gigabit Ethernet and 2 gigabit small form-facrtor pluggable (SFP) ports for the fiber connectivity, there are in total 26 ports. The switch is fully manageable through the web and command line interface.

  • Page 11: Product Image Phontech 7200, 24 Poe Ethernet Gbit Switch

    Product image Phontech 7200, 24 PoE Ethernet GBit Switch Figure 1 Phontech 7200, 24 PoE Ethernet GBit Switch - product image Page - 11 -...

  • Page 12: System Description

    System description The Phontech 7200, 24 PoE Ethernet GBit Switch has 2 internal power supplies. One serves as the main power source and the other as a back up power source. There are 2 power input configurations, AC/AC and AC/DC. The unit also includes a built-in power supply voltage measurement circuit for monitoring purposes.

  • Page 13: Monitoring And Troubleshooting

    • SNMPv1/v2C/v3 Agent 6.1.2 Monitoring and troubleshooting • Remote server logging using Syslog. • Local in the flash and ram logging. • Port based mirroring. The switch system can be configured to mirror frames from multiple ports to a mirror port. Both incoming (source) and outgoing (destination) frames can be mirrored to the mirror port.

  • Page 14: Layer 3 Switching

    Powering down the ports if the temperature gets too high reduces power consumption. 6.2 Mechanical layout Phontech 7200, 24 PoE Ethernet GBit Switch is a standard 19" rack mountable product, that fits in all industry standard 19" cabinets. Figure 2 Phontech 7200, 24 PoE Ethernet GBit Switch - front view...

  • Page 15: Electrical Connections

    6.3 Electrical connections Phontech 7200, 24 PoE Ethernet GBit Switch has 24 RJ-45 connectors, 2 slots for pluggable SFP modules and a USB connector in the front. The back panel contains 2 power input connectors, one for the primary and another for the secondary power sources.

  • Page 16: Figure 6 Phontech 7200, 24 Poe Ethernet Gbit Switch - Rear View Ac/Ac Version

    Figure 6 Phontech 7200, 24 PoE Ethernet GBit Switch - rear view AC/AC version Figure 7 Phontech 7200, 24 PoE Ethernet GBit Switch - front view - mini USB connector Page - 16 -...

  • Page 17: Technical Specifications

    Technical specifications Product specification Supply voltage: Universal AC input (90-250VAC) DC input, 24V Nominal (20-36V) Maximum power consumption: 225 W System power: 30 W PoE power budget: 150 W Dimensions (W/H/D): 440mm/44 mm/290mm (The width is 483mm including front mounting brackets) Weight: 3.9 kg...

  • Page 18: Installation

    • Power supply connections must also be taken into consideration. Jotron strongly recommends the use of junction boxes for the external cable distribution. Glands All cables enter the WP units by means of cable glands. If cable glands are not included, the individual completing the installation must adapt the glands to the actual size of the outer cable diameter in order to obtain the specified ingress protection.

  • Page 19: Fastening

    Generally, Jotron uses pluggable screw terminals, these are durable and both easy to install and service. 8.5 Fastening All cables and conductors should be clamped to the structure with cable ties. 8.6 Preservation Prior to, during and after the installation is complete the equipment surfaces are to be protected against acid holding fluids, pollution, moisture and impacts.

  • Page 20: Cable Requirements For Ethernet

    Power over Ethernet (PoE) allows supporting units to replace the usual wall wart power supplies that are commonly used for most electrical products. Phontech 7200, 24 PoE Ethernet GBit Switch is a PoE capable switch, the end point must support the PoE.

  • Page 21: Figure 8 Phontech 7200, 24 Poe Ethernet Gbit Switch - Powering Voip Phones

    Figure 8 Phontech 7200, 24 PoE Ethernet GBit Switch - powering VoIP phones Page - 21 -...

  • Page 22: Configuration

    Phontech 7200, 24 PoE Ethernet GBit Switch is described in detail below. 9.1.1 CLI requirements The Phontech 7200, 24 PoE Ethernet GBit Switch command line interface (CLI) is accessible on the serial console and requires the following: • Windows XP SP3, Windows Vista SP1, Windows 7 (or a newer version) •...

  • Page 23: Setting Up The Ip Address

    3. Click Enter when ready. Figure 9 Starting the command line interface - log in screen 9.1.3 Setting up the IP address To configure the static IP, do the following: 1. Go into the configuration mode. 2. Input and execute the configuration commands. 3.

  • Page 24: Figure 10 Configuring The Static Ip

    Figure 10 Configuring the static IP Once configuration is complete, do the following: 1. Verify the static IP address is set up correctly. 2. Save to flash. Page - 24 -...

  • Page 25: Figure 11 Verifying The Static Ip

    Figure 11 Verifying the static IP To configure the dynamic IP, do the following: 1. Go into the configuration mode. 2. Input and execute the configuration commands. 3. Exit the configuration mode. Page - 25 -...

  • Page 26: Figure 12 Configuring The Dynamic Ip

    Figure 12 Configuring the dynamic IP Once configuration is complete, do the following: 1. Verify the dynamic IP address is set up correctly. 2. Save to flash. Page - 26 -...

  • Page 27: Changing The Password

    Figure 13 Verifying the dynamic IP 9.1.4 Changing the password To change the password, do the following: 1. Enter the command lines. 2. Save to a non-volatile flash memory. Page - 27 -...

  • Page 28: Command Line Help

    Figure 14 Changing the password 9.1.5 Command line help The command line interface has a built in help menu. Use a question mark (?) to call up the help menu. Page - 28 -...

  • Page 29: Figure 15 List Of Help Menu Commands

    Figure 15 List of help menu commands For a description of the help system, type the word help at the # prompt. Page - 29 -...

  • Page 30: Reloading The Defaults

    Figure 16 Description of the help system 9.1.6 Reloading the defaults There are two options to revert the Phontech 7200, 24 PoE Ethernet GBit Switch back to the default setup, do one of the following: 1. Enter the command line option, reload defaults This removes all configuration.

  • Page 31: Web Interface

    Figure 17 Reloading the defaults 9.2 Web interface 9.2.1 Web interface requirements The Phontech 7200, 24 PoE Ethernet GBit Switch web configuration interface requires the following: • Windows XP SP3, Windows Vista SP1, Windows 7 (or a newer version) •...

  • Page 32: Starting The Web Interface

    9.2.2 Starting the web interface The web interface can be reached through any web browser. First, you must locate the address of the Phontech 7200, 24 PoE Ethernet GBit Switch that is currently configured. The default IP address is: 172.30.0.1/16. The IP address is found in the command line interface.

  • Page 33: Changing The Ip Address

    9.2.3 Changing the IP address The IP address is changed in the IP interfaces table. Figure 20 IP Interfaces table in the IP Configuration screen After making any changes, it is necessary to save them. When you click the SAVE button, it only saves configuration data in RAM, therefore, after a reset any configuration data will be lost.

  • Page 34: Changing The System Password

    4. Click the Save Configuration button. These steps must be completed after every configuration change. Figure 21 Saving from the menu bar 9.2.4 Changing the system password A system password is required to access a web page or to log in from CLI. To change the system password, do the following: 1.

  • Page 35: Help System

    7. Save your configuration in a non-volatile flash memory. Figure 22 System password configuration page 9.2.5 Help system The web configuration includes a help system. To use the help system, do the following: 1. Click the Help button. The information contained in the selected web page is explained within the corresponding help page. Page - 35 -...

  • Page 36: System Information

    Figure 23 Example: IP configuration help page 9.2.6 System information The system information page includes the following information: • Power supply voltages • Latest firmware version • MAC address • System up time data • PHY and board temperature To check the system information, do the following: 1.

  • Page 37: Firmware Update

    Figure 24 System information page 9.2.7 Firmware update To perform a firmware update, do the following: 1. From the menu bar, select Maintenance. 2. From the drop down list, select Firmware. 3. From the drop down list, select Upload. 4. Click Browse. 5.

  • Page 38: Figure 25 Firmware Software Upload

    Figure 25 Firmware software upload page When the software upload is in process a notification will appear stating an update is in progress. It takes approximately 3 mins for the update. Once complete the Phontech 7200, 24 PoE Ethernet GBit Switch restarts.

  • Page 39: System Log

    Figure 26 Firmware update status page 9.2.8 System log Phontech 7200, 24 PoE Ethernet GBit Switch has a logging feature. Critical and non-critical events are logged in the RAM memory. In addition, critical system failure events are saved to flash memory for future investigation.

  • Page 40: Reverting To Defaults

    Figure 27 System log information 9.2.9 Reverting to defaults You can revert the configuration of the Phontech 7200, 24 PoE Ethernet GBit Switch to the original defaults. When you revert, only the IP configuration is retained. To revert the configuration to the original defaults, do the following: 1.

  • Page 41: Operation Instructions

    The front panel has a serial service port. Use a USB mini B plug to connect to service port. 10.1.4 LED  indicators There are two dual color LED indicators located on the left side of the Phontech 7200, 24 PoE Ethernet GBit Switch, each providing different information. In order (from top to bottom) they represent the following: 1.

  • Page 42: Reset Button

    10.1.5 Reset button Use the reset button when rebooting the Phontech 7200, 24 PoE Ethernet GBit Switch or swaping currently running firmware with a previous version. To reset the Phontech 7200, 24 PoE Ethernet GBit Switch, do the following: 1.

  • Page 43: Maintenance

    11 Maintenance Potential maintenance of the Phontech 7200, 24 PoE Ethernet GBit Switch may include switching fuses: The fuses on the AC power supply are soldered to the printed circuit board. Only an authorized person according to Jotron, can perform this task.

  • Page 44: Test And Maintenance Records

    12 Test and maintenance records Below is an overview of all test and maintenance activities. Date M/T* Signature Inspection *M=Maintenance, T=Test. Page - 44 -...

  • Page 45: Warranty

    When purchasing a new Phontech 7200, 24 PoE Ethernet GBit Switch, the warranty period for the is valid for 2 years from the date the product is shipped from Jotron. If you have a Phontech 7200, 24 PoE Ethernet GBit Switch and are unclear about your warranty period contact Jotron.

  • Page 46: Service

    Jotron plastic cover. 13.2 Service All services such as installation, maintenance or replacement must by done by an authorized Jotron service agent. Improper maintenance may destroy the functionality and/or performance of this product Jotron does not accept any responsibility for the dismantling or reassembling of a Phontech 7200, 24 PoE Ethernet GBit Switch that occurs externally from a Jotron authorized facility and/or is handled by someone other than an authorized, trained and certified person.

  • Page 47: Spare Parts

    14 Spare parts Keep the original packaging. If the Phontech 7200, 24 PoE Ethernet GBit Switch needs to be shipped for servicing, it is required to be shipped within the same packaging as when the product was first received. Part Number...

  • Page 48: Recycling And Disposal

    15 Recycling and disposal The Phontech 7200, 24 PoE Ethernet GBit Switch is not to be disposed as normal waste and must be handled in accordance with the applicable waste disposal regulations in the country where the equipment is used.
  • Page 49 Phontech 7200, 24 PoE Ethernet GBit Switch - v.A...

Table of Contents