Troubleshooting - RCA 14F400T User Manual

Thomson/rca television user's guide
Hide thumbs Also See for 14F400T:
Table of Contents

Advertisement

Available languages

Available languages

Other Information

Troubleshooting

Most problems you encounter with your TV/DVD can be corrected by consulting the following troubleshooting
list.
TV won't turn on
Make sure the TV is plugged in.
Check the wall receptacle (or extension cord) to make sure it is "live" by plugging in something else.
Something might be wrong with your remote control. Press the POWER button on the front of the TV.
TV turns off unexpectedly
Sleep timer might have been activated.
Electronic protection circuit may have been activated because of a power surge. Wait 30 seconds and then turn
on again. If this happens frequently, the voltage in your house may be abnormally high or low.
Unplug TV. Wait five minutes. Plug it in again..
No sound, picture okay
Maybe the sound is muted. Try pressing the volume up button to restore sound.
Can't select certain channel
Channel may be blocked or not approved through the V-Chip.
No picture, no sound but TV is on
Maybe the signal type is set wrong. Go to page 8 for detailed instructions.
The channel might be blank — change channels.
Sound okay, picture poor
Check antenna connections. Make sure all of the cables are firmly connected to the jacks.
Try adjusting sharpness function to improve weak signals.
Black box appears on the screen
Closed caption might be on.
The Remote Control Doesn't Work
Something might be between the remote and the remote sensor on the component. Make sure there is a clear
path.
Maybe batteries in remote are weak, dead, or installed incorrectly. Put new batteries in the remote.
You might need to reset the remote: remove batteries and press the number 1 button for at least 60 seconds.
Release the 1 button, replace the batteries, and (if necessary) program the remote again.
Problems with V-Chip/Parental Controls
The rating limits don't work
You must activate the settings.
I don't remember my password and I want to unlock the TV
If you forget your password you can reset it. Enter 5898 as the password and then change it to a new one.
12
Other Information

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents