How To Configure The Wi-Fi Repeater - OEM WS-WN518N2 User Manual

How to configure the Wi-Fi Repeater

You can configure the Wi-Fi Repeater by connecting it with your
computer/laptop with enclosed RJ45 cable or wirelessly. We recommend
you to do it with wire.
A. Configure the Wi-Fi Repeater with RJ45 Cable
A1. Plug the Wi-Fi Repeater to a
wall socket. Connect your
computer / laptop with the Wi-Fi
Repeater with enclosed RJ45
Cable.
A2. Click the "Start" button (it
should be located at the lower-
left corner of your screen), then
click "Control Panel". Click
"View Network Status and
Tasks", and then click "Manage
Network Connections". Right-
click "Local Area Network",
then select "Properties". When
the "Local Area Connection
Properties" window appears,
select "Internet Protocol
Version 4 (TCP/IPv4)" and then
click "Properties".
A3. Setting IP address manually:
Type IP address is
192.168.10.x (x is from 2 to
254), and Subnet mask is
255.255.255.0. Type the
Router's LAN IP address (the
default IP is 192.168.10.1) into
the Default gateway field.