CONTENTS Warranty Warranty For full details please visit us at www.909.com Introduction Environmental protection Description of symbols Specifications General safety warnings and instructions Important safety instructions Specific safety instructions for converters Know your product Introduction How this converter works Power source and protective features...
Manual before using your new 909 appliance. Take special care to heed the Cautions and Warnings. Your 909 appliance has many features that will make your job faster and easier. Safety, performance, and dependability have been given top priority in the development of this tool, making it easy to maintain and operate.
• Store indoors. When not in use, converters should be General safety warnings and instructions stored indoors in dry, and high or locked-up places – out Read all instructions of reach of children. WARNING: Read all instructions before operating converter. •...
Page 5
• If the vehicle accessory outlet fuse opens (blows) when • Do not use with positive ground electrical systems.* plugging in this converter, do not use this converter with Reverse polarity connection will result in a blown fuse this vehicle accessory outlet: and may cause permanent damage to the converter and Do not repeatedly replace the fuse.
Know your product 1. Ventilation slots 2. Power/fault LED indicator 3. USB power port 4. On/Off button 5. Mounting brackets (total of 4, 2 in front, 2 in back) 6. 230-240 Vac outlet 7. Red (positive) cable post 8. High-speed cooling fan 9.
separate charger or transformer that is plugged into an Introduction AC receptacle. Congratulations on purchasing your new converter. Read • The converter is capable of running most chargers and this Instruction Manual and follow the instructions carefully transformers. before using your new converter. Power source and protective features This power converter is configured to supply continuous power in the form of a 230-240 volt AC outlet and a 5 volt...
CAUTIONS Rated versus actual current draw of equipment • If turning the On/Off switch off, then on again does not reset the converter, DO NOT ATTEMPT TO OPEN THE Most electrical tools, appliances, electronic devices and CONVERTER. Opening the converter for any reason audio/visual equipment have labels that indicate the power will void the warranty.
Operating environment Connecting to a power source using the 12 volt dc vehicle adapter plug with “o” ring For best operating results, your converter should be placed on a flat surface, such as the ground, car floor or seat, or connectors other solid surface to help diffuse the heat that is generated.
4. Connect a length of wire on one side of the fuse holder or Connecting to a power source using circuit breaker. Connect the other end of the wire to the the supplied battery clips with “o” ring positive (+) terminal of the converter. connectors 5.
3. Avoid locations that are exposed to heating units, Operating instructions radiators, direct sunlight, or excessive humidity or The power/fault LED indicator lights solid when the dampness. converter is properly connected to a functioning DC Fuse replacement (in vehicle accessory outlet plug) power source.
Recommended accessories for use with your tool are available from your local dealer or authorized service centre. If you need assistance regarding accessories, please contact manufacturer at www.909.com. WARNING: The use of any accessory not recommended for use with this appliance could be hazardous.