Advertisement
PR2000S
MODEL
(MYLOX PORTABLE/DESKTOP PRINTER)
OPERATION:
The printer is powered by an external 12V DC 3.3Amp universal
power supply that charges the internal 2200mA Lithium battery
pack. The power supply can 'auto switch' to directly power the
printer without the battery pack installed or should the battery
pack become discharged.
The printer can also operate from a 12V DC vehicle aux. output.
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Electrothermal PR2000S
- Page 1 PR2000S MODEL (MYLOX PORTABLE/DESKTOP PRINTER) OPERATION: The printer is powered by an external 12V DC 3.3Amp universal power supply that charges the internal 2200mA Lithium battery pack. The power supply can ‘auto switch’ to directly power the printer without the battery pack installed or should the battery pack become discharged.
-
Page 2: Using The Printer
CONNECTING THE BATTERY The battery pack included will have only a limited charge on installation. We recommend ensuring an initial 8 to 12hr charge provided using included power supply. The printer can be used during the charging period. USING THE PRINTER Green Power on Amber... - Page 3 The paper feed button is disabled during a print cycle. If the button is ‘double clicked’ with the printer in an ‘awake’ status the printer will enter the self-test mode. Replacement paper & ribbon specification PR2000S Ribbon Impact 'Bond' Type...
-
Page 4: Troubleshooting
Operating Precaution When using the Printer ● Be careful not to drop or bump the printer on a hard surface. ● Suitable environment for the use of the printer is as follows: Operating temperature : 0°C to 50°C Relative humidity : 10% to 80% (No condensation) ●...
Need help?
Do you have a question about the PR2000S and is the answer not in the manual?
Questions and answers