Gardena 1825 Operating Instructions Manual page 7

The Water Timer is fitted with a sleeve nut
Connecting your Water Timer :
33.3 mm (G1") thread. The adapter supplied
Timer to be connected to taps with a 26.5 mm (G ¾ ") thread.
5
4 Connecting the Water Timer to taps with a 33.3 mm (G1")
thread :
1. Screw the sleeve nut
2. Screw the threaded tap connector
Connecting the Water Timer to taps with a 26.5 mm (G ¾")
thread :
1. Screw the adapter
2. Screw the sleeve nut
6
3. Screw the threaded tap connector
Even if the battery is almost empty, the Water Timer ensures
that an open valve is always closed since less energy is requi-
red to close the valve than to open it.
4
of the Water Timer onto the thread
of the tap by hand (do not use pliers).
5
onto the tap by hand (do not use pliers).
4 of the Water Timer onto the thread
5
of the adapter by hand (do not use pliers).
4 for taps with a
5
allows the Water
6
onto the Water Timer.
6
onto the Water Timer.
7