Summary of Contents for Hovo 700
- Page 1 MULTI-FUNCTION ROBOTIC VACUUM CLEANER Model NO.: Hovo 700 Series USER MANUAL REV. 011117...
-
Page 2: Table Of Contents
Table of Contents Table of Contents·······················································01 Safety Instructions······················································02 Product Features····················································03-04 Product Accessories and Anatomy Main Unit and Accessories··············································05 Anatomy of the Main Unit···············································06 Unit Display Panel·······················································07 Installing the Battery·····················································08 Product Operations and Settings Auto Charging Dock Station and Battery Charging Methods················09 Remote Control························································10 UV Lamp and Water Seeping Speed Settings······························11 Clock and Cleaning Schedule Settings····································12... -
Page 3: Safety Instructions
Before using this product, please read the following safety instructions and follow all routine safety precautions! Please read these instructions carefully. Please store this manual properly. Any operation not in compliance with this manual is likely to cause damage to the product. Warning Only authorized service Do not use any AC adapter other... -
Page 4: Product Features
+ HEPA filter prevent secondary air pollution. The dust bin and 3D filter can be washed directly. Two-way virtual blocker (not included for Hovo 700 or Hovo 750) The virtual blocker creates an invisible barrier that the cleaner will not cross. This can confine the cleaner to a particular room or area. - Page 5 Product Features Swap between suction and sweeping (not included for Hovo 700 or Hovo 750) The cleaner has an interchangeable roller brush and suction inlet designed to avoid getting tangled on carpet. Refer to page 15-17 for details on swapping between the suction inlet and the roller brush.
-
Page 6: Product Accessories And Anatomy
Main Unit and Accessories Mop attachment x 1 Mop pad x 2 Cleaning brush x 1 AC adapter x 1 (not included for Hovo 700 (not included for Hovo 700 (Mounted on the dust bin) or Hovo 750) or Hovo 750) -
Page 7: Anatomy Of The Main Unit
Product Anatomy and Accessories Anatomy of the Main Unit Top View Signal Receiver Dustbin cover Manual charging port Exhaust outlet Bottom View Cliff sensor Front wheel Charging contact Charging contact Right side brush Left side brush Roller brush Cliff sensor Lifting bracket Cliff... -
Page 8: Unit Display Panel
Unit Display Panel Press this button and the cleaner will start automatic cleaning until the power is low, at which point it will automatically return to the auto charging dock station. During the course of cleaning, touch this button and the cleaner will stop. When this indicator is on, the unit is in Spot cleaning mode with a 10 square foot spiral pattern for approximately 2-3 minutes;... -
Page 9: Installing The Battery
Water seeping speed indicator (for Hovo 780 only) First, install the small dustbin with the water tank (refer to page 18 to install). The cleaner will automatically enter into wet mopping mode. Press the "... -
Page 10: Product Operations And Settings
Product Operations and Settings Auto Charging Dock Station Negative recharging contact Positive recharging contact A. Auto charging via charging dock station 1. Securely mount the charging station on flat ground and a wall near and perpendicular to the ground. 2. Avoid obstacles and uneven areas within 6 ft in front of the docking station and 3 ft on both sides. -
Page 11: Remote Control
Product Operations and Settings Remote Control Operations Press" "and the cleaner will enter auto charging mode. ■ Press" "and the cleaner will enter the sleep/wake-up mode (in ■ sleep mode, press and hold this button for 10 seconds to enter the wake-up mode). -
Page 12: Uv Lamp And Water Seeping Speed Settings
By default the UV Lamp is on, to turn it off follow the steps below: Water seeping speed settings (for Hovo 780 only) By default, the water seeping speed is on standard; to switch to fast water seeping speed follow the steps below:... -
Page 13: Clock And Cleaning Schedule Settings
Product Operations and Settings Setting the clock 1. Setting the current day: a) In the standby mode, press the " " button, then press the " " button to set the day ◀ ▶ of the week; press the " ","... -
Page 14: Virtual Blocker Settings
Product Operations and Settings Virtual Blocker Settings (not included for Hovo 700 or Hovo 750) Toggle " " to OFF to turn off the Virtual Blocker. ■ Toggle " " to " " position to set the barrier to emit from the side of the Virtual Blocker ■... -
Page 15: Product Maintenance
Product Maintenance 1. Press "PUSH" on the panel to pop the dust bin cover up (Fig. 1). 2. Take out the dust bin (Fig. 2). 1. Open the upper cover of the dust bin and empty the dirt and debris (Figs. 3, 4, and 5). 2. -
Page 16: Removing The Roller Brush
Product Maintenance Removing the Roller Brush (not included for Hovo 750) 1. As shown in Fig. 1, grab and push inward the U-shaped clips on each side of the sweeping bracket simultaneously to remove. 2. As shown in Fig. 2, pull up the left end of the roller brush and take it out. -
Page 17: Installing The Roller Brush
Product Maintenance Installing the Roller Brush (not included for Hovo 750) 1. As shown in Fig. 1, install the right end of the roller brush into the drive shaft of the cleaner and make sure the shaft of the roller brush aligns with the drive shaft. -
Page 18: Installing/Removing The Suction Inlet
Product Maintenance Installation of the Suction Inlet (not included for Hovo 700) 1. As shown in Fig. 1, grab the U-shaped clip on each side of the sweeping bracket simultaneously to remove. 2. As shown in Fig. 2, pull up the left end of the ONE COVER ALL roller brush to take it out. -
Page 19: Installing The Mop Attachment And Water Tank
Product Maintenance Installing the Mop Attachment and Mop Pad (not included for Hovo 700 or Hovo 750) 1. Install the mop pad onto the mop attachment by adhering it to the velcro. 2. As shown in Fig. 1, mount the mop attachment onto the unit by aligning it with the holes. -
Page 20: Error Codes And Troubleshooting
Error Codes and Troubleshooting The cleaner will beep when it stops working or fails to start working in the following circumstances; users may follow the voice alerts and refer to the error codes below to resolve the issue. Clean the foreign objects on Failure of side The side brushes are the side brushes to resume... -
Page 21: Technical Specifications
Technical Specifications Technical specification for the main unit Specifications 14°F ~ 110°F 14 in x 3.5 in 6 lbs 0.9 L 0.25 L + 0.6 L Technical specification for the charging station Specifications L x W x H: 7.6 in x 0.6 in x 4. 1 in 14°F ~ 110°F Technical specification for the remote control Specifications... - Page 22 Visit www.infinuvo.com · Register your product now to activate your warranty · Get technical support · Request warranty service (only valid if you buy products from authorized resellers) · Find answers on frequently asked questions (FAQ) · Learn maintenance tips ·...
Need help?
Do you have a question about the 700 and is the answer not in the manual?
Questions and answers