To Activate The Velec Electric Motor Of Your Bicycle - Velec A2 Owner's Manual

To activate the Velec electric motor of your bicycle :

1. Turn the key on the battery (or press the –/O button).
2. Press the –/O button on the Control Panel.
1. –/O
button on Battery
P SERIES KIT 48V
Owner's Manual
94
2. –/O
button on Control Panel
The Control Panel has 4 indica-
tors, red lights that indicate the
battery's charge level: 4 lights on
indicate the battery is about 100%
full. 3 red lights mean the battery
is about 70% charged. 2 lights
mean approximately 40% charge
and 1 red light means the battery
charge is approximately 10%.
You may turn the motor On and Off by pressing the –/O switch on the
Control Panel. To turn the electrical power OFF entirely, simply press the -/O
on the right side of the battery.
Control Panel's Battery
–/O (on/off) Switch
Battery Charge Indicator
on Control Panel
95