Do you have a question about the OMVC-200 and is the answer not in the manual?
Questions and answers
Summary of Contents for Opticis Co., Ltd. OMVC-200
Page 1
System Requirements for Setup Installation Self-EDID Programming Procedure Multi-format to Troubleshooting, Maintenance, Technical Support 1-fiber DVI converter, Product Specifications Warranty Information OMVC-200 Pictorials Figure 1 – Connection Diagram of OMVC-200 User’s Manual 1- 0 Manual Contents Doc No. : OC-MV150102 / Rev1.2...
Page 2
System Requirements for Setup Welcome! Congratulations on your purchase of the Multi-format to 1-fiber DVI converter, OMVC-200. This manual contains information that will assist you in installing Hardware requirements and operating the product. You have to have a graphic source having a DVI, VGA, Component video, S-video or Composite video port.
Page 3
DVI Source (Blue) for each input will be turned on. Note1: OMVC-200 is designed to detect the first incoming video signal and convert to 1 fiber DVI signal or decide a priority input by pre- Figure 1 – Connection Diagram of OMVC-200 programming as DVI, VGA, Component, S-Video, and Composite in an order when all signals are connected and turned on.
Page 4
EDID from the display and stores it in the EEPROM of the converter. We highly recommend do Self-EDID once when you install your system with OMVC-200 for the - Ensure that the video ports are firmly plugged in to the sources and display.
Page 5
Warranty Information Product Specifications 1 (One) Year Warranty OMVC-200, Multi-format to 1-fiber DVI converter Opticis warrants this OMVC-200 to be free from defects in workmanship and materials, under normal use and service, for a period of Compliance with standard: Supports DVI1.0,...
Need help?
Do you have a question about the OMVC-200 and is the answer not in the manual?
Questions and answers