Advertisement
Crimping Process
1. Insert contact into crimp tool flap locator, use the correct location for
contact type.
2. Move flap locator so that the contact is inserted into the crimp window.
3. Pre close crimp tool til 1 ratchet tooth clicks.
4. Insert wire into contact.
5. Close crimp tool until the ratchet releases the handle.
6. Open flap locator and remove crimped contact from tool.
IN 91107
7853106-02 - position 1
7853106-03 - position 2
Insulation Crimp Zone
Wire Crimp Zone
05/26/09
Advertisement
