Download Print this page

TTS EL00421 User Manual

4 remote control rugged racers with docking station

Advertisement

Quick Links

Warranty & Support
This product is provided with a one year warranty for problems found during
normal usage. Mistreating the Rugged Racers or opening the unit will invalidate
this warranty. Any data stored on the unit and any consequential loss is not
covered by this warranty. The battery is not user replaceable.
Technical Support
Please visit www.tts-group.co.uk for the latest product information.
Email feedback@tts-group.co.uk for technical support.
TTS Group Ltd.
Park Lane Business Park
Kirkby-in-Ashfield
Nottinghamshire,
NG17 9GU, UK.
Freephone: 0800 318686 Freefax: 0800 137525
RUGGED RACERS MANUAL.indd 1
TTS is proud to be part of
Rugged Racers
WARNING: Do not dispose of this product in
household waste. Hand it over to a collection point
for recycling electronic appliances.
WARNING! Not suitable for children under 36 months
due to small parts – choking hazard. Made in China,
on behalf of the TTS Group Ltd.
TM
6v
Nxxxxx
N448
plc
TTS Product Code:
EL00421
17/03/2015 14:36

Advertisement

loading

Summary of Contents for TTS EL00421

  • Page 1 Any data stored on the unit and any consequential loss is not covered by this warranty. The battery is not user replaceable. Technical Support Please visit www.tts-group.co.uk for the latest product information. Email feedback@tts-group.co.uk for technical support. TTS Group Ltd.
  • Page 2 Rugged Racers 4 Remote control rugged racers with docking station USER GUIDE RUGGED RACERS MANUAL.indd 2 17/03/2015 14:36...
  • Page 3: Contents Of Pack

    Important Information Battery precautions Rugged Racers and Remote Controls are powered by NiMH battery packs which are user replaceable. Care & maintenance If necessary, wipe the Rugged Racers gently with a clean damp cloth. Keep the Rugged Racers away from direct sunlight and heat. Do not allow the Rugged Racers to come into contact with water or other liquids.
  • Page 4 Rugged Racers Recharging your Rugged Racers & Remotes Insert the Battery Charger cable into the charging socket underneath the docking station. Plug the Battery Charger into a wall socket. Place the Rugged Racers and Remote Controllers into the sockets. The red LEDs on Rugged Racers and Remotes will light up to show that the batteries are charging.
  • Page 5 Know your Rugged Racers Straight line adjuster On/Off Switch Recharge contacts Aerial Signal being sent/charged indicator Pen holder Charging indicator Forward/ backwards Turn left/right RUGGED RACERS MANUAL.indd 5 17/03/2015 14:36...
  • Page 6: Replacing The Battery

    Rugged Racers Using your Rugged Racers Your Rugged Racers have been designed so that they can all operate simultaneously. They use four separate channels on 27MHz frequency. If you have more than 4 x Rugged Racers, you will have to use them in separate rooms because all similar colours operate on the same channel.
  • Page 7: Troubleshooting

    Troubleshooting Your Rugged Racers have been designed to work within an Early Years environment. However, it is not intended to be dropped or trodden on or otherwise mistreated. Under no circumstances should you open up the Rugged Racers or Remote Controllers as this will invalidate your warranty.
  • Page 8: Specification

    Rugged Racers Specification Item Specification up to 10 meters Range 27MHz Frequency 0.5 m/sec (depends on battery condition) Speed of movement Batteries Remote Controls 3.6V 140mAh NiMH Rugged Racers 3.6V 600mAh NiMH Battery life approx. 1.5 hours in normal usage (depending on the amount of movement) International Charging Adaptor The Rugged Racers are supplied with a multi-region adaptor.

This manual is also suitable for:

Rugged racers