Advertisement
Rugged Racers
TM
Recharging your Rugged Racers & Remotes
Insert the Battery Charger cable into the charging socket underneath the
docking station.
Plug the Battery Charger into a wall socket.
Place the Rugged Racers and Remote Controllers into the sockets.
The red LEDs on Rugged Racers and Remotes will light up to show that the
batteries are charging.
The red LEDs on the Remotes will turn green when fully charged.
The red LEDs on the Cars will turn off and the front lights will turn on when
fully charged.
It may take up to 12 hours to fully charge if the battery has been fully
discharged.
Only charge your Rugged Racers and Remotes in the docking station and
only use the battery charger provided.
RUGGED RACERS MANUAL.indd 4
17/03/2015 14:36
Advertisement
