Page 1
Errata Notice This document contains references to “Centellax.” Please note that the test and measurement product portfolio once owned by Centellax, Inc. is now part of Agilent Technologies. For more information about these products and support, go to www.agilent.com/find/bert-news.
This warranty does not extend to Products, which have been repaired, calibrated, or altered in any way by a facility that is not approved, in writing, by Centellax to perform such work. This warranty does not apply to any Product where the seals or serial number thereof has been removed, defaced or changed, nor to Products not of our own manufacture.
• Driver for high power amplifiers e.g. TWT or linear The two diode voltages are provided on the rear panel of the TA2U50HA System power amplifiers. Amplifier and can be used to determine the amplifier output power level (as •...
1W broadband amplifier featuring 6 octaves of RF coverage from 2 GHz to greater than 50 GHz. The TA2U50HA is designed to be a useful general purpose RF Power System Amplifier for laboratory or test system applications where high- er broadband RF power is needed.
Operating Manual Section 3: Specifications Front Panel Output: The TA2U50HA features a 1.85mm(V) 50GHz female con- nector at the amplifier’s output. Table 1: Performance Specification Led Indicator: One LED annunciator on the front panel indicates the System Amplifier is powered.
Page 8
R&D laboratory, where a manual control system is suffi- cient to evaluate performance. Understanding the compression characteristics of the TA2U50HA System Amplifier is important in these situations and can often be com- pensated for in the Automated Test Environment (ATE) by using an iter-...
DUT performance. A calibrated power splitter (or calibrated coupler) connected to the The small size of TA2U50HA System Amplifier is easy to place close amplifier input reference plane and to power sensor A , as shown, estab- to the DUT input “Reference Plane”.