Tip: It is best if you nudge the bassinet out with your knee..
Recommendation: Before using the bassinet, check that all
the locks are
secure.
Assembling the pushchair seat
Place the seat so that the two rods on the frame are parallel
with each
other. Then lock these using the safety closure
Unfold the hood to the required position.
Attach the safety bar.
Adjust the foot rest as required
To adjust the foot rest, press both buttons simultaneously as shown
and move the foot rest to the required position.
Adjusting the seat back
Pull the unlocking rod upwards and move the seat to the required
position.
IMPORTANT: the pushchair seat is assembled and dismantled in
exactly the same way as the bassinet.
Assembling the infant car seat
Fit the adapter to the infant car seat. Caution: The adapter only
works in one direction – it must be assembled exactly
Dismantling the infant car seat
Pull the two unlocking levers simultaneously and the adapters will release.
Safety belt
Secure your child with the belt. Make sure that the belt is tight, you can adjust that
with the slide buckle. Make sure that the belt buckles for secure are attached
during closing. Open the belt: Press the RED Dot and both tabs open and you can
take your child out of the seat.
4