Related Manuals for Aimco SPC-P2325Q
Summary of Contents for Aimco SPC-P2325Q
- Page 1 18V Cordless Precision Clutch Shut Off Pistol Screwdriver MODEL NO.: SPC-P2325Q SPC-P2625Q SPC-P2925Q SPC-P21225Q...
- Page 3 (A) 1/4" Hex with quick change chuck. (B) Covered Torque Adjustment. LED indicator provides simple process information to the operator. The signal is visible from any angle. (D) LED light for workpiece illumination. Tool Trigger with repeat protection feature to avoid double hits on an already seated fastener.
- Page 4 WARNING! READ ALL INSTRUCTIONS. Always observe the safety regulations applicable in your country to reduce the risk of fire, electric shock, and personal injury. Understand the following safety instructions before attempting to operate this product. Always wear eye protection when working with power tools.
- Page 5 ● Do not operate charger if it has ● When servicing an AIMCO Sig- been damaged in any way. Take it nature Series Precision Clutch to a qualified service center for re- tool it is important to use pair.
- Page 6 ● Do not incinerate the battery blue LED shows and the tool will pack even if it is severely dam- be in reverse operation. To aged or completely worn out. switch the tool back to forward The battery pack can explode in operation, simply press the but- a fire.
- Page 7 Assembly Operations Check for damage to tool, parts, or This product has been carefully accessories that may have oc- inspected prior to leaving the facto- curred during transport. Take time ry. It should provide you with years to thoroughly read and understand of satisfying service under normal this manual prior to operation.
- Page 8 Steps for Torque Adjustment 6. Prior to using on an application, NOTE: Remove the battery pack it is advised to verify the output before adjusting the torque to avoid torque of the tool as set. Check injury. the torque on an Auditor™ Digi- tal Tester (or comparable sys- 1.
-
Page 9: Led Indication
LED INDICATION Status of the Tool Action to be Taken LED lights RED, YELLOW and The motor is GREEN together for one second. None required switched on. A long beep for one second. The preset torque The application is not reached should be reworked. -
Page 10: Charging The Battery Pack
CHARGING THE BATTERY PACK Li-ion Battery Pack 4. If the power lamp (RED) does NOTE: Your battery pack is not not light immediately or goes fully charged at the time of pur- out soon after the charger is chase. Be sure to charge battery plugged in, consult a Signature before first use. -
Page 11: Lamp Indications
LAMP INDICATIONS Red Light Charger is plugged into the AC outlet. Ready to charge. Yellow Flashing Light (1) When the temperature of the battery is too low (<0 (<32 F)), it is in a trickle charge mode until the temperature of the battery goes up to over 0 C(<32 F). -
Page 12: Specifications
SPECIFICATIONS MODEL SPC-P2325Q SPC-P2625Q Voltage 18 VDC 18 VDC Drive Size 6.35 mm Hex. (1/4”) 6.35 mm Hex. (1/4”) Torque Range 0.8 ~ 3 Nm (7 ~ 27 in-lb) 1~6 Nm (9 ~ 53 in-lb) Free Speed 500 ~ 1,550 rpm... - Page 13 NOISE AND VIBRATION LEVEL DECLARATION (Max. value) EN 60745-2-2 Models: SPC-P2325Q, SPC-P2625Q Sound pressure level (no load) L : 65.5 dBA Uncertainty K: 1.5 dB Sound power level (no load) L : 76.5 dBA Uncertainty K: 1.5 dB Vibration total value (no load) a : 0.4 m/s...
- Page 14 GEAR BOX UNITS For Model: SPC-P2325Q Index Index Description Q’ty Description Q’ty Inverted Retaining Ring Gear Plate Assembly Washer Gear Box Assembly (1) O-ring Planet Gear Gear Cage Assembly For Model: SPC-P2625Q Index Index Description Q’ty Description Q’ty Inverted Retaining Ring...
- Page 15 GEAR BOX UNITS For Model: SPC-P2925Q Index Index Description Q’ty Description Q’ty Inverted Retaining Ring Planet Gear Washer Gear Plate Assembly Planet Gear Gear Box Assembly (1) O-ring Gear Cage Assembly For Model: SPC-P21225Q Index Index Description Q’ty Description Q’ty Inverted Retaining Ring Gear Plate Assembly Washer...
- Page 16 HOUSING AND MOTOR For Model: SPC-P2325Q Index Index Description Q'ty Description Q'ty Upper Housing Anvil Collar Lower Housing Sensor Assembly Cover F/R Valve (1 set x 2 pcs) Brushless Motor w/driver Spring Ring PC Board O-Ring (Ø16 x Ø1.5) Connector Wire...
- Page 17 HOUSING AND MOTOR For Models: SPC-P2625Q SPC-P2925Q Index Index Description Q'ty Description Q'ty Upper Housing Anvil Collar Lower Housing Sensor Assembly Cover F/R Valve (1 set x 2 pcs) Brushless Motor w/driver Spring Ring PC Board O-Ring (Ø16 x Ø1.5) Connector Wire Motor Holder Trigger Assembly...
- Page 18 HOUSING AND MOTOR For Model: SPC-P21225Q Index Index Description Q'ty Description Q'ty Upper Housing Anvil Collar Lower Housing Sensor Assembly Cover F/R Valve (1 set x 2 pcs) Brushless Motor w/driver Spring Ring PC Board O-Ring (Ø16 x Ø1.5) Connector Wire Motor Holder Trigger Assembly Screw (M4 x 6L)
- Page 19 NOTES _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________...
- Page 20 LIT-MAN254 Rev. 06/15 Printed in USA ©2015 AIMCO...
Need help?
Do you have a question about the SPC-P2325Q and is the answer not in the manual?
Questions and answers