Download Print this page

U.S. General 67418 Assembly And Operating Instructions

7-drawer 56” top chest for roll cabinet

Advertisement

Quick Links

iTem
67418
7-Drawer 56" Top ChesT for roll CabineT
assembly and operating instructions
read this material before using this product.
failure to do so can result in serious injury.
saVe This manual.
Copyright
2009 by Harbor Freight Tools
©
herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Diagrams
within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ
slightly from the product described herein. Tools required for assembly and service may not be included.
Total Cabinet wt.
Capacity
net weight
material
rails
Designed to fit on top of SKU 67419-56" Drawer Top Chest Roller Cabinet (Sold Separately)
Top Chest made from heavyduty sheet steel with red finish and chrome handles.
if you suddenly drop a weight on the roll Cabinet it may create, for a brief
instant, an excess load potentially causing property damage, serious
personal injury and/or DeaTh.
1.
improper use can cause the Cabinet to tip, causing
Do not exceed the 1,375 lb.
Loading above). Do not exceed the weight capacity for any one drawer or shelf.
Do not open more than one drawer at a time.
load the Cabinet evenly from the bottom up.
never move the Cabinet by pushing or pulling on the Top Chest roller Cabinet.
2.
Only use the Cabinet on a flat, level and solid surface that is capable of supporting
the weight of the Cabinet and its contents. To keep the Cabinet (67419) from rolling,
press down on the lock lever on two casters after moving.
SKU 67418
Distributed exclusively by harbor freight Tools
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
. All rights reserved. No portion of this manual or any artwork contained
®

speCifiCaTions

Drawer
1375 lb.*
Top Tray
275 lb.
Drawer A (2)
Steel
Drawer B (2)
Ball-Bearing
Drawer C (2)
Main Door
*always be aware of Dynamic loading.
warninG
total weight capacity (dead weight, see Dynamic
For technical questions please call 1-800-444-3353.
size
56.3" x 21.9" x 4.4"
22.4" x 19.6" x 2.9"
12.3" x 19.6" x 2.9"
37.3" x 19.6" x 4.8"
13.2" x 20.7" x 16.1"
personal injury or DeaTh.
.
®
weight Capacity
(per drawer)
231 lb.
132 lb.* ea.
110 lb.* ea.
220 lb. *
200 lb.
Page 1

Advertisement

loading
Need help?

Need help?

Do you have a question about the 67418 and is the answer not in the manual?

Questions and answers

Summary of Contents for U.S. General 67418

  • Page 1: Specifications

    Cabinet by pushing or pulling on the Top Chest roller Cabinet. Only use the Cabinet on a flat, level and solid surface that is capable of supporting the weight of the Cabinet and its contents. To keep the Cabinet (67419) from rolling, press down on the lock lever on two casters after moving. SKU 67418 For technical questions please call 1-800-444-3353. Page 1...
  • Page 2 To open the drawers you must first unlock all of them using the keys that are taped onto the outside of each drawer. SKU 67418 For technical questions please call 1-800-444-3353. Page 2...
  • Page 3 1-piece screw Drawer labels Right plastic lock Chest lock pole Rubber matt Set Screws for lock pole Blank Key lock with Key lock link noTe: There are no replacement parts available. SKU 67418 For technical questions please call 1-800-444-3353. Page 3...
  • Page 4 (SKU 67418). each hole is careful not to crush fingers and hands 3 inches in from the front and back and while performing this task.