Element Ti8 New User Guide
Congratulations and thank you for purchasing the Element Ti8 Android TV Box! We really appreciate
your business!
This email will help guide and teach you the basics of setting up and using your Element Ti8 Android TV
Box.
CONNECTING YOUR AIR MOUSE REMOTE (Only if you purchased the Air Mouse Remote)
1. Take the USB dongle out of the plastic packaging.
2. Plug the USB dongle into the USB plug on the side of the Element box.
3. Point the remote at the screen to use the air mouse function.
4. Refer to Air Mouse instructions in the box for troubleshooting options.
CONNECTING TO THE INTERNET
1. Click on the SETTINGS tab on the Home Screen.
2. Double Click the NETWORK tab at the top of the screen.
3. Choose either WIFI or ETHERNET. If an Ethernet cord is attached you will see that the box says
"connected".
4. If WIFI is chosen enter your password using the remote.
5. Click the GREEN ARROW on the keyboard shown on the screen.
6. Wait for the "Connected Successfully" message to be displayed showing that you are connected.
Watch the Video -
https://www.youtube.com/watch?v=r5M92NhXLAk
RUNNING THE E-Z STREAM UPDATER
1. After connecting your box to the Internet, the E-Z Stream Updater will pop up with a prompt
asking if you would like to check for updates. Click YES.
2. If you are running the Updater at a separate time from connecting the Internet, please click the
Updater Icon on the home screen.
3. Click UPDATE NOW at the bottom of the screen.
4. Choose the version (Adult or Family Friendly) that you want to install and click INSTALL to the
right of the version.
5. Please allow a couple of minutes for the version to install. Once it has finished, you will be taken
to the Kodi app. The Kodi app is now loaded with add-ons based on the version you chose.
6. Start Streaming!
Need help?
Do you have a question about the Ti8 and is the answer not in the manual?
Questions and answers
The Ti8 won't Factory Data Reset Erase
The Element Ti8 may not perform a factory data reset due to outdated reset methods no longer working or system errors such as "unknown error" and "update failed" that users have reported even after attempting a factory reset.
This answer is automatically generated
My ez stream Ti8 will no longer allow me to update. I did the factory reset and cleared all and started over. when clicking on the updater, it will show update available but will not down load same. Just shows unknown error. I can not down load anything so there for I can't activate Kodi
If you cannot update your Element Ti8 EZ Stream device, follow these steps to troubleshoot the issue:
1. Check Internet Connection – Ensure your device is connected to the Internet by following these steps:
- Click on the SETTINGS tab on the Home Screen.
- Double-click the NETWORK tab.
- Choose either WIFI or ETHERNET and confirm the connection.
2. Restart the Device – Power off the device, unplug it for a few minutes, then restart it and try updating again.
3. Manually Run the Updater – If the update prompt does not appear:
- Click the Updater Icon on the home screen.
- Click UPDATE NOW at the bottom of the screen.
- Choose the version (Adult or Family Friendly) and click INSTALL.
4. Allow Time for Installation – The update process may take a few minutes. Do not interrupt it.
5. Check for Storage Space – If the update fails, ensure your device has enough storage.
6. Factory Reset (Last Resort) – If the issue persists, consider resetting the device to factory settings and trying the update again.
If the problem continues, contact Element Ti8 support for further assistance.
This answer is automatically generated