Stand Instructions - LG 32LD460-MA Owner's Manual

STAND INSTRUCTIONS

Image shown may differ from your TV.
INSTALLATION
Carefully place the TV screen side down on
1
a cushioned surface to protect the screen
from damage.
Assemble the parts of the STAND BODY
2
with the STAND BASE of the TV.
STAND BODY
M4 x 20
STAND BASE
3
Assemble the TV as shown.
4
Install the 4 screws into the holes shown.
M4 x 20
!
NOTE
►
When assembling the desk type stand,
make sure the screws are fully tightened (If
not tightened fully, the TV can tilt forward
after the product installation). Do not over
tighten.
(For 26/32LD350, 32/37/42/47LD460, 32/37/42/47LD465)
DETACHMENT
Carefully place the TV screen side down on
1
a cushioned surface to protect the screen
from damage.
2
Remove the screws from the TV.
3
Detach the stand from TV.
PROTECTION COVER
After removing the stand, install the included
PROTECTION COVER over the hole for the
stand.
Press the PROTECTION COVER into the TV until
you hear it click.
When installing the wall mounting bracket, use
the PROTECTION COVER.
19