Advertisement
Quick Links
QUIKPOINT DRILL-MATE
MORTAR GUN
Operator's Manual
Model # 3000 & 3600
Drill-Mate Model #3000
Before use, be sure everyone using this
tool reads and understands this manual.
Date purchased__________________________
Drill-Mate with
a drill mounted
Model #3600
Made in USA
Patented
Advertisement
Summary of Contents for Sunrise MORTAR GUN 3000
- Page 1 QUIKPOINT DRILL-MATE MORTAR GUN Operator’s Manual Model # 3000 & 3600 Drill-Mate with a drill mounted Model #3600 Drill-Mate Model #3000 Before use, be sure everyone using this tool reads and understands this manual. Date purchased__________________________ Made in USA Patented...
- Page 7 Assembly of Auger Barrel , Hopper Body , Auger,Cam-Roller and Cam Coupling Firmly seat Barrel (#901) so that the back of the Barrel Slide Auger Barrel (#901) Protrudes out of the Hopper Body (#908) as shown. into Hopper Body. (#908) Roller-Stop Slide Auger-assembly into barrel until foward set screw in Secure Barrel into...
- Page 8 Mounting a Drill Some drills have a left threaded Reversing-Screw We recommend removing the holding the chuck onto the drill. Open the Chuck chuck from the drill and threading all the way. Then look inside the chuck to see what the Cam-Coupling on to the drill style of screw head is used (Allen head, Phillips, mandrell.
- Page 9 Cam-Guard Installing Snap right and left sides of the Kitty-Corner Cam-Guard (#709) into position Cam-Guard on to plastic tongue between aluminum drill supports. as shown Quikpoint Drill-Mate fully assembled Quikpoint Drill-Mate fully assembled with Drill and Chuck and Cam-Guard. with cam-Guard and Drill without Chuck. Notice Aluminum bars are extended back by mounting with two bolts as shown...
-
Page 10: Operation
OPERATION 1. Be sure forward/reverse switch, on the drill, is in forward position. The Quikpoint will only deliver mortar when the drill is in forward rotation. 2. Load hopper with mixed mortar. 3. Hold the Quikpoint as in figure A. The oval nozzle can be rotated for Vertical and Horizontal Joints. - Page 12 As of July 2012 the “Hopper Body” , “Cam Guard” and s of July 2012 the s of July 2012 the “H er B , ” y C “ am G am G ” ” d “Auger Barrel” partshave been redesigned . These parts will A “...
- Page 16 Tuff Key custom flange nut spanner Tool Box, Safety Gloves and Safety Glasses Professional Brick Raking & Pointing Package As above, with addition of Quikpoint pointing attachment assembled on a Makita 6510LVR drill Sunrise Tools & Equipment, Romsey, United Kingdom - 01794 830 841 enquiries@sunrisetools.co.uk...
Need help?
Do you have a question about the MORTAR GUN 3000 and is the answer not in the manual?
Questions and answers