Table of Contents
Advertisement
USB
Connecting a USB device
1
Connect the USB device with the USB
cable. (P.94)
2
Press the [HOME] button.
3
Touch
.
4
Touch [USB]. (P.12)
Ñ
Disconnect the USB device
1
Press the [HOME] button.
2
Touch a source other than [USB].
3
Detach the USB device.
Ñ
Usable USB device
You can use a mass-storage-class USB device
with this unit.
The word "USB device" appearing in this manual
indicates a flash memory device.
● About the file system
The file system should be the one of the
following.
• FAT16
• FAT32
NOTE
• Install the USB device in the place where it will
not affect safe driving.
• You cannot connect a USB device via a USB hub
and Multi Card Reader.
• Take backups of the audio files used with this
unit. The files can be erased depending on the
operating conditions of the USB device.
We shall have no compensation for any damage
arising from any erased data.
• exFAT
• NTFS
USB Basic Operation
Most functions can be controlled from the
source control screen and playback screen.
NOTE
• Set the remote controller mode switch to AUD
mode before starting operation, see Switch the
operation mode (P.85).
Control screen
1
6
7
3
4
Open the drawer
7
Close the drawer
6
7
] / [
[CODEC /
1
• When a high-resolution source is played, its
format information is displayed.
• [
] : Repeats the current track/folder. Each
time you touch the key, repeat modes are
switched in the following sequence:
File repeat (
), Folder repeat (
all (
)
• [
] : Randomly plays all tracks in the current
folder. Each time you touch the key, random
modes are switched in the following sequence:
File random (
), Random off (
USB
2
5
5
5
8
]
), Repeat
)
English
31
Hide quick links:
Advertisement
Table of Contents
