JVC LT-32DZ1 Instructions Manual page 28

Press " " to select (Screen) item. (Only
2
available in PC-RGB mode)
Press " " to enter the submenu.
Adjust the screen flow below:
Auto Adjust: Adjust picture to fill screen automatically.
Horizontal Pos.: Adjust the horizontal position of
picture from 0 to 100.
Vertical Pos.: Adjust the vertical position of picture
from 0 to 100.
Size: Adjust the frequency of picture from 0 to 100.
Phase: Adjust the phase of picture from 0 to 100.
Press "MENU" button to exit.
5 4
The OSD menu picture will be concealed
automatically after 1 minute.
Repeat step 1 and 2
"
Press
"
press
(Picture Mode) adjustment
Press "
between: Standard、Mid、User、
Dynamic.
(Contrast) adjustment
Press "
picture from 0 to 100.
(Brightness) adjustment
Press "
the picture from 0 to 100.
(Color) adjustment
Press "
saturation from 0 to100. Adjust this
setting until the colors on the screen
look natural.
(Sharpness) adjustment
Press "
levels on your screen from 0 to100.
(Tint) adjustment
Press "
picture from 0
(Color Temperature)adjustment
Press "
Medium、Warm 、Cool.
(Aspect Ratio)adjustment
Press "
the screen：16:9、4:3、Auto、
Panoramic、Zoom1、Zoom2、Full
Native.
(Noise Reduction)adjustment
Press "
reduction levels among Auto、 Off、
Weak、Middle 、Strong.
22
"
button to select items and
"
button to adjust it.
" to switch picture mode
" to adjust the contrast of the
" to adjust the brightness of
" to adjust the color
" to adjust the sharpness
" to adjust the tint of the
to100.(NTSC ONLY)
" to select among medium
" to select the ratio of
" to adjust the noise