Maintenance - Centech 66972 Owner's Manual And Safety Instructions

Maintenance

Procedures not specifically explained in this manual must be performed only by a
qualified technician.
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION:
Disconnect all loads from the inverter before performing any procedure in this section.
TO PREVENT SERIOUS INJURY FROM TOOL FAILURE:
Do not use damaged equipment. If abnormal noise or vibration
occurs, have the problem corrected before further use.
1. BEFORE EACH USE, inspect the
general condition of the tool. Check for:
a. loose hardware,
b. misalignment or binding
of moving parts,
c. damaged cord/electrical wiring,
Page 6 For technical questions, please call 1-888-866-5797.
d. cracked or broken parts, and
e. any other condition that may
affect its safe operation.
2. Keep this unit clean and dry. Disconnect
the unit before cleaning. Clean only the
outside of this unit with a soft, dry cloth.
Item 66972