Advertisement
Quick Links
H-racer 2.0
ASSEMBLY GUIDE
Model No.: FCJJ-23
Warning
To avoid the risk of property damage, serious injury or death:
This kit should only be used by persons 12 years old and up, and only under the supervision of adults who
have familiarized themselves with the safety measures described in the kit. Keep small children and
animals away, as it contains small parts that could be swallowed. The fuel cell generates gases that are
very easily ignited. Read the instructions before use and have them ready for reference.
Battery operation instructions:
1. The removing and inserting of batteries is to be conducted by the adults only.
When inserting the batteries make sure that you are doing so with the correct polarity (the positive end of
the battery must match up with the "+" and the negative end of the battery must match up with the "-"
indicated on the battery pack) and then close the battery compartment.
2. Non-rechargeable batteries are not to be recharged.
3. Different types of batteries such as rechargable, alkline and standard batteries or new and used batteries
are not to be mixed and should be used separately.
4. The two spare red&black cables are not to be inserted into an AC socket.
5. Exhausted batteries are to be removed from the battery compartment.
Advertisement
Summary of Contents for Horizon Educational H-racer 2.0
-
Page 1: Assembly Guide
H-racer 2.0 ASSEMBLY GUIDE Model No.: FCJJ-23 Warning To avoid the risk of property damage, serious injury or death: This kit should only be used by persons 12 years old and up, and only under the supervision of adults who have familiarized themselves with the safety measures described in the kit. - Page 2 ASSEMBLY GUIDE H-racer 2.0 H-Racer 2.0 AA batteries=2 Units Water=25ml LR44 batteries=3 Units What do you need? Connect one of the flexible tubes to the small purging valve. Make sure the tube is inserted all the way into the base of the purging valve Place the refueling input valve above the opening nozzle.
- Page 3 Remove the H sticker from its backing and position it on the car accordingly. The assembly of your H-racer 2.0 is now complete. Slowly pour water into the water tank opening above the refueling station until the water level reaches the top.
- Page 4 Switch the refueling station to the "☼" sign. The small blue lights will now be flashing and you are now producing To purge the complete fuel cell power system, hydrogen fuel using unlimited power from the sun! You can remove all the air out of the balloon by pulling see you are producing hydrogen when small oxygen bubbles on the syringe.
- Page 5 If all connections are correct and bubbles are released, and the balloon still does not fill up - your H-racer 2.0 refuel- ing system may be damaged due to improper use. Do not attempt to repair or fix your H-racer 2.0, contact support@horizonfuelcell.com for assistance.
Need help?
Do you have a question about the H-racer 2.0 and is the answer not in the manual?
Questions and answers