Switch Ettings And Misc Connections - CPI MCR211A Instruction Manual

MCR/TSR Alpha Series Remotes
D S S
IP WITCH ETTINGS AND
Following are tables indicating the designation, description, and factory settings of each. Factory settings are
underlined.
Table 1 - Dip Switch Settings
S1
1 Crossmute Enable
2 4 Wire / Full Duplex operation
3
4
5
6
Speaker mute off-hook (handset model)
7
Speaker mute on Deskmic Tx (deskmic model)
8 Allows volume to be turned down completely
* Table 1 describes the functions provided by the dip switch located and accessible on the bottom of the unit.
Table 2 - J5 Connections
PIN FUNCTION DESCRIPTION
1 +12V
2 Ground
3 Encoder Audio
4 Encoder Beep
5 Encoder PTT
6 Encoder Mic Mute
7 Encoder Speaker Mute
* Table 2 describes the J5 connections located on the main board
6
M
ISC
ON
Cloning Disable
not used
not used
not used
J5
C
ONNECTIONS
Speaker always active
Prevents volume from being turned down completely
OFF
Crossmute Disable
2 Wire operation
Cloning Enable
not used
not used
not used