Reese 26002 Installation Instructions Manual

DUAL CAM HP ASSEMBLED
Equipment Required:
Fastener Kit: 100126
Wrenches: 1-1/2" Open End, ¾" Open End
½" Open End, ¾" Socket & Ratchet
Drill Bits: 7/16", 17/32" & Center Drill (Pilot Drill)
Other: 8 – 10" C-Clamp, Tape Measure, Light Penetrant Oil
*For Tubular Style Frame Attachment
**Not Shown, For C-Channel Style Frame Attachment
j
Qty. (2) Dual Cam HP Cam Arm Assembly
k
Qty. (2) Hanger Bracket
l
Qty. (4) ½ - 13 Thread Forming Screw*
m
½-13 X 3 ½" Square Head Bolt*
Qty. (2)
n
Qty. (6) ½-13 Hex Nut*
o
½" Lock Washer**
Qty. (2)
p
½-13 X 1 ½" Grade 5 Bolt**
Qty. (4)
INDEX
1. INSTALLATION & ASSEMBLY
2. PRE-INSTALLATION (TOW VEHICLE MAY NOT BE PRESENT)
2. INSTALLATION WITH TOW VEHICLE PRESENT
3. TUBULAR FRAME DUAL CAM HP FRAME PLATE INSTALLATION
4. C-CHANNEL FRAME DUAL CAM HP FRAME PLATE INSTALLATION
5. CAM ARM ADJUSTMENT
6. BEFORE EACH TRIP & MAINTENANCE
7. NOTES
8. LIMITED LIFETIME WARRANTY
For Installation or Operation Support contact CPP Technical Service: 1-888-521-0510.
Failure to follow all of these instructions may result in death or serious injury!
Installation Instructions
REESE Dual Cam HP
High-Performance Sway Control
j
Figure 1
k
DEALER/INSTALLER:
(1) Provide this Manual to end user
END USER:
(1) Read and follow this Manual every time you use Dual Cam HP.
(2) Save this Manual for Future Reference.
(3) Pass on copies of Manual to any other users or owner.
Do Not Exceed Lower of Towing Vehicle Manufacturer's Rating, or
Trailer Manufacturer's Rating
n*
m*
P. 2-4
P. 4
P.4-5
P. 5-6
P. 6
P. 7
P. 7
P. 8
P. 8
WARNING:
Part Numbers:
l*
Figure 2 – Inside View of Trailer Frame
26002